An axial pull of 50 KN is suddenly applied to a steel bar 2 m long and 1000 mm2 in cross-section. If modulus of elasticity is 200 GPa, find strain energy stored in the bar

Related MCQs

• steel bar 10 mm x 10 mm cross section is subjected to an axial tensile load of 20kN. If the length of bar is 1 m and E = 200 GPa, then elongation of the bar is:
• The increase in the length of a bar of length 1 m, area 300 mm2, modulus of elasticity 2×10^5 N/mm2 due to a tensile load of 120 KN is .
• strain energy stored in a body due to suddenly applied load compared to when it is applied gradually is
• A bar 2 m long and 20 mm diameter is subjected to an axial pull of 125.6 KN. Due to this load, length increases by 4 mm and diameter reduce by 0.012 mm. Find Poison‟s ratio.
• The modulus of rigidity and poisson‟s ratio of a material are 80 GPa and 0.3 respectively. Its young‟s modulus will be
• Young‟s modulus of a material which gives 2 kN/mm2 stress at 0.01 strain is
• The ultimate shear stress of a mild steel plate of 10 mm thickness is 350 N/mm2. Calculate the diameter of the hole that can be punched to it without exceeding a compressive stress of 700 N/mm2.
• 3.5 m long bar is under tensile load and due to that increase in length of bar is 1.75 mm then strain =
• The Young‟s modulus of elasticity of a material is 2.5 times its modulus of rigidity. The Poisson‟s ratio for the material will be
• The stress induced in a body due to suddenly applied load compared to when it is applied gradually is