if total amount of energy absorbed by a steel specimen is 5 N-m for a volume of 10 x 10-3 mm3, the modulus of toughness is                       N/mm2

Related MCQs

• toughness is defined as total energy absorbed by material in                        
• a steel specimen during the test subjected to a stress of 300 N/mm2 and strain 1.5 x 10-3. the modulus of elasticity of steel is
• an aluminium specimen is subjected to a stress of 160 /mm2 and corressponding modulus of resilience is 0.128 Mpa. Youngs modulus for aluminium is             
• a steel specimen is subjected to a stress of 300 Mpa. If E = 200 Gpa, modulus of resilience is                  
• modulus of toughness is               
• total energy absorbed by material in elastic deformation is known as                       
• a concrete specimen of square cross section is subjected to a force of 100 kN. A side of square is 75 mm. if strain in concrete block is 1.5 x 10-3, the value of youngs modulus for concrete is                       
• The ratio of the volume of atoms per unit cell to the total volume occupied by the unit cell called------ --.
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is