If the S and R inputs of the gated S-R latch are connected together using a gate then there is only a single input to the latch. The input is represented by D instead of S or R (A gated D-Latch)

Related MCQs

• THE FOUR OUTPUTS OF TWO 4-INPUT MULTIPLEXERS, CONNECTED TO FORM A 16-INPUT MULTIPLEXER, ARE CONNECTED TOGETHER THROUGH A 4-INPUT                   GATE
• If an S-R latch has a 1 on the S input and a 0 on the R input and then the S input goes to 0, the latch will be
• An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?
• The inverter OR-gate and AND gate are called deeision-making elements because they can recognize some input while disregarding others. A gate
• For a gated D-Latch if EN=1 and D=1 then Q(t+1) =                 
• In NOR gate based S-R latch if both S and R inputs are set to logic 0, the previous output state is maintained.
• If the region beneath the gate is left initially uncharged the gate field must induce a channel before current can flow. Thus the gate voltage enhances the channel current and sucha device is said to operate in the
• The output of a logic gate is 1 when all its inputs are at logic 0. the gate is either
• Which of the following gates are added to the inputs of the OR gate to convert it to the NAND gate ?
• the number of inputs connected to the gate without any degradation in the