A system having connected load of 100 kW, peak load of 80 kW, base load of 20 kW and average load of 40 kW will have a load factor of

Related MCQs

• In a system if base load is same as maximum demand, the load factor will be
• In a pumping installation the suction line is is 4 metre long and suction pipe diameter is 100 mm. Now if the suction pipe is replaced by a pipe combination consisting of 2 metres of 100 mm diameter pipe joined with 2 metres of 150 mm diameter pipe, the suction heat will become
• The ideal output velocity of steam from a nozzle having an enthalpy drop of 100 kcal/kg will be
• For the same peak pressure and heat input
• Which of the following can have octane rating of more than 100?
• Capacitor kVA required to bring the power factor of a 500 kW load 70% to 85% would be
• If the power factor of an electrical system is unity, it means
• An average percentage of Carbon and Hydrogen in Petrol may be roughly given as
• The ends of piston rod in steam engines are connected to
• If performance of SI engines of different manufacture having different capacities, sizes and systems are to be compared the common parameter would be