If a heat engine given an output of 3.5 kW and input is 10000 Joules per second, the thermal efficiency of the engine will be

Related MCQs

• A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
• A gas turbine cycle with regenerator has a thermal efficiency of 26%. If intercooler and reheater are also introduced what could be expected thermal efficiency
• Overall thermal efficiency of a thermal power plant is
• A perfect heat engine works on the Carnot cycle between 1000?C and 200?C. The efficiency of the engine will be
• The thermal efficiency of a dual cycle engine with fixed compression ratio and fixed quantity of het and with increase in pressure ratio, will
• Which one of the following factors will not assist in improving thermal efficiency of a compression ignition engine?
• Thermal efficiency of a compression ignition engine may be of the order of
• Thermal efficiency of a spark ignition engine at full load usually is in the range
• In a throttle governed single cylinder steam engine 5 I.H.P. is developed when steam consumption is 50 kg per hour and 2 I.H.P. is developed when the steam consumption is 26 kg per hour. The steam consumptions when the engine develops 4 I.H.P. will be
• In gas and petrol engines thermal efficiency may be expected in the range