The proportioning of tendons in design of prestressed concrete simple flat slab between the column and middle strips may be based on                      

Related MCQs

• A simple prestressed flat slab is generally supported by a network of                      
• The end block of a prestressed concrete beam has a rectangular section; a cable carrying a force of 200kn is to be anchored against the end block at the centre if the cube strength of concrete at transfer is 30n/mm2. Design the maximum permissible bearing pressure?(Abr = 10000mm2)
• The prestressed concrete slab systems are ideally suited for                      
• Thickened part of a flat slab over its supporting column, is technically known as
• The design principles of continuous flat slab floors are similar to                      
• The minimum cube strength of concrete used for a prestressed member, is                  
• If the surface is rough tamped and without links to withstand a horizontal shear stress of 0.6n/mm2 and assuming the moduli of elasticity of precast and insitu cast concrete to be equal the centroid of the composite section is located 110mm from the top of the slab, second moment area of composite section is 2487×105mm4, calculate ultimate shearing resistance?
• The design of a two-way-slab supported on all four sides involves the computation of
• The precast prestressed hollow core slabs, with or without topping is an important structural element in                      
• One way slabs may be supported across the entire width of the slab by means of