16 W/m K, with a temperature difference between the two sides of 20°C.

Related MCQs

• The probability of spontaneous emission increases rapidly with the energy difference between the two states.
• A large heat exchanger transfers a total of 100 MW. Assume the wall separating steam and seawater is 4 mm of steel, conductivity 15 W/m K and that a maximum of 5°C difference between the two fluids is allowed. Find the required minimum area for the heat transfer.
• For destructive interference to take place, the path difference between the two waves should be:
• A composite wall of a furnace has two layers of equal thickness having thermal conductivities in the ratio 2:3. What is the ratio of the temperature drop across the two layers?
• A small light bulb (25 W) inside a refrigerator is kept on and 50 W of energy from the outside seeps into the refrigerated space. How much of temperature difference to the ambient(at 20°C) must the refrigerator have in its heat exchanger having an area of 1 m2 and heat transfer coefficient of 15 W/Km2 to reject the leak of energy.
• The amount of heat flow through a unit area of material of unit thickness in one hour, when the temperature difference is maintained at 1°C is known as                         of the material.
• A faulty thermometer has its fixed points marked as 5° and 95°. The temperature of a body as measured by the faulty thermometer is 59°. Find the correct temperature of the body on a Celsius scale.
• A metal sphere of surface area 0.0225 m2 is in an evacuated enclosure whose walls are held at a very low temperature. Electric current is passed through resistors embedded in the sphere causing electrical energy to be dissipated at the rate of 75 W. If the sphere surfaces temperature is measured to be 560 K, while in steady state, calculate emissivity of the sphere surface
• What term is used for the defect, produced by an array of dislocations that produces a small difference in orientation between the adjoining lattices?
• A composite wall is made of two layers of thickness δ1 and δ2 having thermal conductivities k and 2k and equal surface area normal to the direction of heat flow. The outer surface of composite wall are at 100 degree Celsius and 200 degree Celsius. The minimum surface temperature at the junction is 150 degree Celsius. What will be the ratio of wall thickness?