The tensile strength of mild steel for bolts and nuts should not be less than

Related MCQs

• For the steel member exposed to weather and accessible for repainting, the thickness of steel should not be less than (accepting the webs of Indian Standard rolled steel joists and channels).
• For the steel member exposed to weather and accessible for repainting, the thickness of steel should not be less than (accepting the webs of Indian Standard rolled steel joists and channels).
• The allowable tensile stress in structural mild steel plates for steel tank is assumed as
• For steel members exposed to weather and not accessible for repainting, the thickness of steel should not be less than
• For steel members not exposed to weather, the thickness of steel should not be less than
• For steel members not exposed to weather, the thickness of steel should not be less than
• The thickness of the web of a mild steel plate girder is less than d/200. If only one horizontal stiffener is used, it is placed at
• The thickness of the web of a mild steel plate girder is less than d/200. If only one horizontal stiffener is used, it is placed at
• The equivalent axial tensile load Pe, which produces an average axial tensile stress in the section equivalent to the combined stress due to axial tension P and bending M, at the extreme fibre of the section, is given by (where Z is the section modulus of the section).
• In a truss girder of a bridge, a diagonal consists of mild steel flat 4001.S.F. and carries a pull of 80 tonnes. If the gross-diameter of the rivet is 26 mm, the number of rivets required in the splice, is