McqMate
Chapters
1. |
Reciprocation of the cutting tool in shaping machines is accomplished by. |
A. | Rack pinion mechanism |
B. | Crank and connecting rod mechanism |
C. | Cam and cam follower mechanism |
D. | Oscillating lever mechanism |
Answer» A. Rack pinion mechanism |
2. |
Internal keyway in gears can be cut in |
A. | Shaping machine |
B. | Planning machine |
C. | Slotting machine |
D. | None of the above |
Answer» C. Slotting machine |
3. |
The job reciprocates in |
A. | Shaping machine |
B. | Planning machine |
C. | slotting machine |
D. | All of the above |
Answer» D. All of the above |
4. |
The T-slots in the table of planning machines are cut in. |
A. | Shaping machine |
B. | Planning machine |
C. | Slotting machine |
D. | None of these |
Answer» D. None of these |
5. |
Flat surface can be produced in |
A. | Shaping machine only |
B. | Planning machine only |
C. | Slotting machine only |
D. | All of the above |
Answer» D. All of the above |
6. |
Large number of cutting tools can be simultaneously used in. |
A. | Shaping machine |
B. | Planning machine |
C. | Slotting machine |
D. | None of these |
Answer» D. None of these |
7. |
Heavy cuts can be given during machining in |
A. | Shaping machine |
B. | Planning machine |
C. | Slotting machine |
D. | None of these |
Answer» C. Slotting machine |
8. |
Slotting machines are used to cut internal gear teeth for |
A. | Batch production |
B. | Lot production |
C. | Mass production |
D. | None of these |
Answer» C. Mass production |
9. |
The work-table can rotate in |
A. | Shaping machine |
B. | Planning machine |
C. | Slotting machine |
D. | None of these |
Answer» C. Slotting machine |
10. |
Length of the stroke can be varied in |
A. | Shaping machine |
B. | Planning machine |
C. | Slotting machine |
D. | All of these |
Answer» D. All of these |
Done Reading?