McqMate
Chapters
1. |
------------- these are systems which are commissioned by a particular customer. |
A. | Generic Product |
B. | Customized product |
C. | Product |
D. | None of these |
Answer» D. None of these |
2. |
------------- component should be designed and implemented so that it can be reused in many different programs. |
A. | Reusability |
B. | Effectiveness |
C. | Flexibility |
D. | None of these |
Answer» A. Reusability |
3. |
A primary goal of software engineering is to improve the -------------and to increase the productivity and job satisfaction of software engineers. |
A. | Quality of software product |
B. | Satisfaction of product |
C. | Flexibility |
D. | None of these |
Answer» A. Quality of software product |
4. |
A fundamental Principal of software engineering is to design software products that minimize the intellectual distance between ----------- and solution. |
A. | Method |
B. | Process |
C. | Product |
D. | Problem |
Answer» A. Method |
5. |
------------ is outgrowth of hardware and system engineering. |
A. | Software engineering |
B. | Requirement engineering |
C. | System engineering |
D. | None of these |
Answer» B. Requirement engineering |
6. |
------------ provide automated or semi-automated support for methods. |
A. | Software engineering tools |
B. | Software engineering Procedures |
C. | Software engineering Methods |
D. | None of these |
Answer» A. Software engineering tools |
7. |
------------- encompass a broad array of tasks that include project planning and
|
A. | Software engineering tools |
B. | Software engineering Procedures |
C. | Software engineering Methods |
D. | None of these |
Answer» A. Software engineering tools |
8. |
------------- are the glue that holds the methods and tools together and they enable rational and timely development of computer software. |
A. | Software engineering tools |
B. | Software engineering Procedures |
C. | Software engineering Methods |
D. | None of these |
Answer» D. None of these |
9. |
Software engineering needed for building -----------systems in a timely manner with high quality. |
A. | Software |
B. | Hardware |
C. | Process |
D. | All of above |
Answer» A. Software |
10. |
software engineering is a ---------------- |
A. | Graphical technology |
B. | Layered technology |
C. | Paired technology |
D. | Electrical technology |
Answer» A. Graphical technology |
11. |
--------- provides the technical how to building software. |
A. | Software engineering tools |
B. | Software engineering Procedures |
C. | Software engineering Methods |
D. | None of these |
Answer» C. Software engineering Methods |
12. |
Software is ------ |
A. | Developed |
B. | Manufactured |
C. | Non manufactured |
D. | None of these |
Answer» B. Manufactured |
13. |
Software does not----------- |
A. | Engineered |
B. | Developed |
C. | Maintained |
D. | Wear out |
Answer» A. Engineered |
14. |
------------ consists of a means of monitoring the software engineering processes and methods used to ensure quality. |
A. | Software quality assurance |
B. | Software quality product |
C. | Software requirement |
D. | Software specification |
Answer» B. Software quality product |
15. |
In McCall’s software quality factors, Product operation phase ----not contains. |
A. | Correctness |
B. | Reliability |
C. | Usability |
D. | Flexibility |
Answer» C. Usability |
16. |
In McCall’s software quality factors, Product revision phase ----not contains. |
A. | Maintainability |
B. | Flexibility |
C. | Testability |
D. | Portability |
Answer» A. Maintainability |
17. |
In McCall’s software quality factors, Product transition phase ----not conta |
A. | Portability |
B. | Reusability |
C. | Interoperability |
D. | Testability |
Answer» D. Testability |
18. |
---------- it includes the steps of maintenance phase of software. |
A. | Maintainability |
B. | Flexibility |
C. | Testability |
D. | Portability |
Answer» A. Maintainability |
19. |
The property of software in which software product may be adapted to changes of specifications. |
A. | Maintainability |
B. | Flexibility |
C. | Testability |
D. | Portability |
Answer» D. Portability |
20. |
It is the ability of software system to product their various components against unauthorized access and modification. |
A. | Correctness |
B. | Reliability |
C. | Usability |
D. | Integrity |
Answer» D. Integrity |
21. |
------------ is the probability that the software will operate correctly over specified time interval. |
A. | Correctness |
B. | Reliability |
C. | Usability |
D. | Flexibility |
Answer» D. Flexibility |
22. |
--------------will be able to interface it with another system. |
A. | Correctness |
B. | Interoperability |
C. | Usability |
D. | Flexibility |
Answer» A. Correctness |
23. |
----------- the ease with which conformance to standards can be checked. |
A. | Correctness |
B. | Auditability |
C. | Usability |
D. | Flexibility |
Answer» B. Auditability |
24. |
--------- The degree to which standard interfaces protocols and bandwidth are used. |
A. | Correctness |
B. | Communication commonality |
C. | Usability |
D. | Flexibility |
Answer» D. Flexibility |
25. |
------- The compactness of the program in terms of lines of code. |
A. | Conciseness |
B. | Consistency |
C. | Data commonality |
D. | Error tolerance |
Answer» A. Conciseness |
26. |
--------The use of uniform design and documentation techniques throughout the software development project. |
A. | Conciseness |
B. | Consistency |
C. | Data commonality |
D. | Error tolerance |
Answer» B. Consistency |
27. |
----------- the degree to which the software assists in enabling new users to apply the system. |
A. | Training |
B. | Traceability |
C. | Simplicity |
D. | Security |
Answer» A. Training |
28. |
--------- The degree to which the source code provides meaningful documentation. |
A. | Self-documentation |
B. | Training |
C. | Traceability |
D. | Simplicity |
Answer» A. Self-documentation |
29. |
---------- The damage that occurs when the program encounters an error. |
A. | Error tolerance |
B. | Training |
C. | Traceability |
D. | simplicity |
Answer» A. Error tolerance |
30. |
-------------- The functional independence of program componets. |
A. | Error tolerance |
B. | Training |
C. | Modularity |
D. | Simplicity |
Answer» C. Modularity |
31. |
---------- The degree to which full implementation of required function has been achieved. |
A. | Error tolerance |
B. | Training |
C. | Completeness |
D. | Simplicity |
Answer» C. Completeness |
32. |
Pick up the odd one out of the following process m |
A. | Component assembly model |
B. | Prototyping Model |
C. | Spiral model |
D. | Waterfall Model |
Answer» D. Waterfall Model |
33. |
The Linear Sequential or Classic Life Cycle is also ca |
A. | Waterfall Model |
B. | Incremental Model |
C. | Spiral model |
D. | Prototyping Model |
Answer» A. Waterfall Model |
34. |
The waterfall model of the software process considers each process activity as a _______ pha |
A. | separate |
B. | discrete |
C. | Both a and b options |
D. | None of the above |
Answer» C. Both a and b options |
35. |
In Boehm’s spiral model, each loop in the spiral represents _____ of the softwa |
A. | phase |
B. | design |
C. | documentation |
D. | none of the above |
Answer» A. phase |
36. |
In incremental process model, some high end function are desig |
A. | Construction framework |
B. | Modeling framework |
C. | Planning framework |
D. | Deployment framework |
Answer» B. Modeling framework |
37. |
RAD stands f |
A. | Relative Application Development |
B. | Rapid Application Development |
C. | Rapid Application Document |
D. | None of the mentioned |
Answer» B. Rapid Application Development |
38. |
RAD Model ha |
A. | 2 phases |
B. | 3 phase |
C. | 5 phases |
D. | 6 phases |
Answer» C. 5 phases |
39. |
SDLC stands f |
A. | Software Development Life Cycle |
B. | System Development Life cycle |
C. | Software Design Life Cycle |
D. | System Design Life Cycle |
Answer» A. Software Development Life Cycle |
40. |
Which one of the following is not an Evolutionary Process Model? |
A. | WINWIN Spiral Model |
B. | Incremental Model |
C. | Concurrent Development Model |
D. | All of the mentioned |
Answer» D. All of the mentioned |
41. |
The Incremental Model is a result of combination of elements of which two models? |
A. | Build & FIX Model & Waterfall Model |
B. | Linear Model & RAD Model |
C. | Linear Model & Prototyping Model |
D. | Waterfall Model & RAD Model |
Answer» C. Linear Model & Prototyping Model |
Done Reading?