Wireless Network Solved MCQs

1.

If a datagram router goes down then …………..

A. all packets will suffer
B. only those packets which are queued in the router at that time will suffer
C. only those packets which are not queued in the router at that time will suffer
Answer» B. only those packets which are queued in the router at that time will suffer
2.

In datagram subnet new route is chosen …………………

A. for every packet sent
B. for all the packet sent
C. only for the first packet
Answer» A. for every packet sent
3.

For a connection oriented service, we need a ……………

A. virtual circuit subnet
B. short circuit subnet
C. datagram subnet
Answer» C. datagram subnet
4.

In ………………, each packet of a message follows the same path from sender to receiver.

A. circuit switching
B. message switching
C. virtual approach to packet switching
Answer» A. circuit switching
5.

A permanent virtual circuit involves ……………..

A. connection establishment
B. data transfer
C. connection release
Answer» B. data transfer
6.

The set of optimal routes from all sources to a given destination from a tree rooted to the destination is known as ……………..

A. binary tree (
B. sparse tree
C. sink tree
Answer» C. sink tree
7.

Adaptive routing algorithms get their information from ………….

A. only from local environment
B. only from adjacent routers
C. from locally, adjacent, external routers
Answer» C. from locally, adjacent, external routers
8.

In Hierarchical routing for N router subnet, the optimal number of levels is …………..

A. logn
B. log(n -1)
C. lnn (
Answer» C. lnn (
9.

The router algorithm takes the decision to changes the route when ……………..

A. router changes
B. topology changes
C. user changes
Answer» B. topology changes
10.

If route from router I to router J is computed on line based on the current statistics, then it is called as ………………..

A. dynamic routing
B. session routing
C. temporary routing
Answer» A. dynamic routing
11.

If the subnet uses virtual circuits internally, routing decisions are made only when a new virtual circuit is being setup. This is called as……………..

A. session routing
B. circuit routing
C. datagram routing
Answer» A. session routing
12.

…………….. change their routing decisions to reflect changes in the topology.

A. nonadaptive algorithms
B. adaptive algorithms
C. static algorithms
Answer» B. adaptive algorithms
13.

If router J is on the optimal path from router I to router K, then the optimal path from J to K also falls along the same route is known as ………………..

A. routing principle
B. optimality principle
C. sink tree principle
Answer» B. optimality principle
14.

……………. do not base their routing decisions on measurements or estimates of the current traffic and topology.

A. non adaptive algorithms
B. adaptive algorithms
C. static algorithms
Answer» A. non adaptive algorithms
15.

The method of network routing where every possible path between transmitting and receiving DTE is used is called ……………

A. random routing
B. packet flooding
C. directory routing
Answer» B. packet flooding
16.

In Hierarchical routing, the routers are divided into what is called as ……………..

A. zones
B. cells
C. regions
Answer» C. regions
17.

The regions in Hierarchical routing are grouped in to ……………..

A. clusters
B. zones
C. blocks
Answer» A. clusters
18.

The Clusters in Hierarchical routing are grouped in to ………………

A. clusters
B. zones
C. blocks
Answer» B. zones
19.

If a router sends every incoming packet out only on those lines that are going approximately in the right direction is known as ……………..

A. random flooding
B. static flooding
C. selective flooding
Answer» C. selective flooding
20.

To do multicast routing, each router computes a …………………

A. binary tree
B. avl tree
C. spanning tree
Answer» C. spanning tree
21.

In ………………. to send a multicast message a host sends it to the core, which then does the multicast along the spanning tree.

A. core based trees
B. avl trees
C. binary trees
Answer» A. core based trees
22.

In distance vector routing algorithm, each router maintains a separate routing table with the following entries.

A. preferred input line , estimated time
B. preferred input line, estimated distance
C. preferred output line, estimated time
Answer» C. preferred output line, estimated time
23.

In distance vector routing algorithm, the routing tables are updated …………………

A. by exchanging information with the neighbours
B. automatically
C. using the backup database
Answer» A. by exchanging information with the neighbours
24.

In AODV routing algorithm for MANETs, the route is discovered at time

A. only when the network is established
B. in middle of the transmission
C. when there is a need for route by the host
Answer» C. when there is a need for route by the host
25.

The processes that keep track of all mobile hosts visiting the area is ……………..

A. home agent
B. mobile agent
C. foreign agent
Answer» C. foreign agent
Tags
Question and answers in Wireless Network, Wireless Network multiple choice questions and answers, Wireless Network Important MCQs, Solved MCQs for Wireless Network, Wireless Network MCQs with answers PDF download

We need your help!

We're developing a website for study materials for students.
We would love to hear your answers to some of the questions.

Take Survey