| 1. |
The expected qualities of a product are |
| A. | it satisfies the needs and expectations of the customer |
| B. | It has a pleasing appearance and handles well |
| C. | It has high reliability and functions safely over its intended life |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 2. |
determination of the amount of time required to |
| A. | Method |
| B. | Motion |
| C. | Work |
| D. | Time |
| Answer» D. Time | |
| 3. |
The 4Ms does not include . |
| A. | Men |
| B. | Material |
| C. | Message |
| D. | Machinery. |
| Answer» C. Message | |
| 4. |
In which type of production system the unit cost of production is low? |
| A. | Combined production |
| B. | Continuous production |
| C. | Intermittent production |
| D. | Custom production |
| Answer» B. Continuous production | |
| 5. |
All of the following decisions fall within the scope of operations management except for |
| A. | financial analysis |
| B. | Design of products and processes |
| C. | location of facilities |
| D. | Quality management |
| Answer» A. financial analysis | |
| 6. |
. may be defined as the ratio between output and input. |
| A. | Production |
| B. | Productivity |
| C. | Batch production |
| D. | Job production. |
| Answer» B. Productivity | |
| 7. |
A is something which is offered to customers to satisfy their needs or wants. |
| A. | Process |
| B. | Price |
| C. | Promotion |
| D. | Product |
| Answer» D. Product | |
| 8. |
Production is the process by which raw materials and other inputs are converted in to . |
| A. | Finished Product |
| B. | Services |
| C. | Satisfaction |
| D. | Loyalty |
| Answer» A. Finished Product | |
| 9. |
The competitive advantage in the production function can be achieved through . |
| A. | A High wastage |
| B. | More cost |
| C. | Higher quality |
| D. | Lowest quantity |
| Answer» C. Higher quality | |
| 10. |
Which of the following industries should be located near the vicinity of raw materials? |
| A. | Cycles |
| B. | Televisions |
| C. | Sewing machines |
| D. | Steel mills |
| Answer» D. Steel mills | |
| 11. |
If all the processing equipment and machines are arranged according to the sequence of operations of a product the layout is known as |
| A. | Product layout |
| B. | Process layout |
| C. | Fixed position layout |
| D. | Combination layout |
| Answer» A. Product layout | |
| 12. |
The following type of layout is preferred to manufacture a standard product in large quantity |
| A. | Product layout |
| B. | Process layout |
| C. | Fixed position layout |
| D. | Combination layout |
| Answer» A. Product layout | |
| 13. |
The following type of layout is preferred for low volume production of non standard products |
| A. | Product layout |
| B. | Process layout |
| C. | Fixed position layout |
| D. | Combination layout |
| Answer» B. Process layout | |
| 14. |
In ship manufacturing, the type of layout preferred is |
| A. | Product layout |
| B. | Process layout |
| C. | Fixed position layout |
| D. | Combination layout |
| Answer» C. Fixed position layout | |
| 15. |
Raw Materials and WIP can be classified under |
| A. | Indirect Material |
| B. | Direct Material |
| C. | Finished Material |
| D. | Standard Parts |
| Answer» B. Direct Material | |
| 16. |
The first activity of Purchasing cycle is |
| A. | Communicating requirement to the purchase |
| B. | Source Selection and development |
| C. | Recognizing the need for procurement |
| D. | Inspection of goods |
| Answer» C. Recognizing the need for procurement | |
| 17. |
TQM stands for |
| A. | Total Quality Management |
| B. | Total Quantity Management |
| C. | Total Qualitative Management |
| D. | To question management |
| Answer» A. Total Quality Management | |
| 18. |
Kaizen is a process, the purpose of which goes beyond simple productivity improvement. |
| A. | weekly |
| B. | daily |
| C. | monthly |
| D. | annual |
| Answer» B. daily | |
| 19. |
"Poka-yoke" is the Japanese term for |
| A. | Card |
| B. | Fool proof |
| C. | Continuous improvement |
| D. | Fishbone diagram |
| Answer» B. Fool proof | |
| 20. |
Kaizen is a Japanese term meaning |
| A. | continuous improvement |
| B. | Just-in-time (JIT) |
| C. | a fishbone diagram |
| D. | setting standards |
| Answer» A. continuous improvement | |
| 21. |
Which of the following is not an inventory? |
| A. | Machines |
| B. | Raw material |
| C. | Finished products |
| D. | Consumable tools |
| Answer» A. Machines | |
| 22. |
Which of the following is true for Inventory control? |
| A. | Economic order quantity has minimum total cost |
| B. | Inventory carrying costs increases with quantity per order |
| C. | Ordering cost decreases with lo size |
| D. | All of the above |
| Answer» D. All of the above | |
| 23. |
Re-ordering level is calculated as |
| A. | Maximum consumption rate x Maximum re-order |
| B. | Minimum consumption rate x Minimum re-order |
| C. | Maximum consumption rate x Minimum re-order |
| D. | Minimum consumption rate x Maximum re-order |
| Answer» A. Maximum consumption rate x Maximum re-order | |
| 24. |
The nerve center or brain of any computer sy |
| A. | CPU |
| B. | Storage device |
| C. | ALU |
| D. | Monitor |
| Answer» A. CPU | |
| 25. |
Maintenance consist of the following action(s) |
| A. | Replace of component |
| B. | Repair of component |
| C. | Service of component |
| D. | All of the above |
| Answer» D. All of the above | |