McqMate
1. |
Which of the following functions is not a core function of an organization |
A. | The accounting and finance function |
B. | The marketing (including sale) function |
C. | The operation function |
D. | The product or service development function |
Answer» A. The accounting and finance function |
2. |
Most operation produce a mixture of both products and services which of the following business is closest to producing ‘pure’ services ? |
A. | IT company |
B. | Counselor /therapist |
C. | Steel company |
D. | A restaurant |
Answer» B. Counselor /therapist |
3. |
Operations can be classified according to their volume and variety of production as well as the degree of variation & visibility . Which of the following operations would be classified as high volume , low variety ? |
A. | A front office bank |
B. | A family doctor |
C. | A carpenter |
D. | A fast food restaurant |
Answer» D. A fast food restaurant |
4. |
Which of the following activities is not a direct responsibility of operations management? |
A. | Developing an operations strategy for the operation |
B. | Planning & controlling the operations |
C. | Determining the exact mix of products and services that customers will want |
D. | Designing the operations products , services & process |
Answer» C. Determining the exact mix of products and services that customers will want |
5. |
Operations can be classified according to the degree of variations in demand and visibility of the operations as well as their volume and variety of production which of the following operations would be classified as high variation & high visibility ? |
A. | A front office staff |
B. | A family doctor |
C. | A carpenter |
D. | A fast food restaurant |
Answer» B. A family doctor |
6. |
Which of the following would not be normally be considered a general characteristics of a service? |
A. | Production and consumption are simultaneous |
B. | Low contact service can often be made more efficient than high contract |
C. | Production and consumption can always be spatially separated |
D. | Many services involve both tangible & intangible outputs |
Answer» C. Production and consumption can always be spatially separated |
7. |
Which of the following would not be normally considered as a key feature of operations management? |
A. | Most new technology is implemented |
B. | World class operations can give an organization competitive advantage |
C. | Operations researches mathematical techniques for optimizing process |
D. | Operations is the part of an organization which creates wealth through the management of the transformation process |
Answer» D. Operations is the part of an organization which creates wealth through the management of the transformation process |
8. |
Which of the following is the least likely decision to be made by operations managers ? |
A. | Selecting the locations and layout of a facility |
B. | Designing and improving the jobs of the workspace |
C. | How to use quality techniques to reduce waste |
D. | Deciding which market areas to manufacture products for |
Answer» D. Deciding which market areas to manufacture products for |
9. |
Operations management is applicable |
A. | Mostly to the service sector |
B. | To services exclusively |
C. | Mostly to the manufacturing sector |
D. | To the manufacturing & service sectors |
Answer» C. Mostly to the manufacturing sector |
10. |
The field of operations management is shaped by advances in which of the following fields? |
A. | Chemistry and physics |
B. | Industrial engineering & management science |
C. | Biology and anatomy |
D. | Information science |
Answer» B. Industrial engineering & management science |
11. |
The five element in the management process are |
A. | Plan ,direct , update, lead & surprise |
B. | Accounting /finance , marketing, operations and management |
C. | Organize , plan , control, staff and manage |
D. | Plan, organize, staff , lead and control |
Answer» C. Organize , plan , control, staff and manage |
12. |
The responsibilities of the operations manager include |
A. | Planning , organizing , staffing , procuring and reviewing |
B. | Forecasting , designing , planning , organizing , and controlling |
C. | Forecasting , designing ,operating , procuring , and reviewing |
D. | Planning , organizing , staffing , leading , and controlling |
Answer» D. Planning , organizing , staffing , leading , and controlling |
13. |
Which of the following is not an element of management process |
A. | Pricing |
B. | Staffing |
C. | Planning |
D. | Controlling |
Answer» A. Pricing |
14. |
Which of the following illustrate an activity that does not add value? |
A. | Training employees |
B. | Ordering parts from a supplier |
C. | Making a part |
D. | Accumulating parts in front of the next work centre |
Answer» D. Accumulating parts in front of the next work centre |
15. |
Which of the following statements regarding a pull system is true ? |
A. | Large lots are pulled from upstream stations |
B. | Work is pulled to the downstream work stations before it is actually needed |
C. | Manufacturing cycle time is increased |
D. | Problems become more obvious |
Answer» D. Problems become more obvious |
16. |
Which one of the following is a concern expressed by suppliers ? |
A. | Elimination of in plant inventory |
B. | Delivery to the point of use |
C. | Production with zero defects |
D. | Large lot sizes |
Answer» C. Production with zero defects |
17. |
Reduction of in-transit inventory encouraged through use of |
A. | Supplier location near plants |
B. | Low cost , global suppliers |
C. | Low carrying cost |
D. | Use of trains , not trucks |
Answer» A. Supplier location near plants |
18. |
Which of the following is not a benefit of small production lots ? |
A. | Work in process inventory is smaller |
B. | Fewer setups |
C. | Workstation can be placed closed together |
D. | Manufacturing cycle time is shorter |
Answer» B. Fewer setups |
19. |
Flexible manufacturing systems (FMS) are reported to have a number of benefits . which is not a reported benefits of FMS? |
A. | Increased quality |
B. | More flexible than the manufacturing systems they replace |
C. | Lead time and throughout time reduction |
D. | Increased utilization |
Answer» B. More flexible than the manufacturing systems they replace |
20. |
Process technologies differ in their flexibility capabilities and economics and will therefore be appropriate for different parts of the volume – variety matrix. Flexible manufacturing systems are usually |
A. | Low variety , mid volume |
B. | Mid variety , high volume |
C. | Mid variety , mid volume |
D. | High variety , low volume |
Answer» C. Mid variety , mid volume |
21. |
What do flexible manufacturing systems (FMS) do? |
A. | Moves materials between opportunities |
B. | Moves and manipulates products , parts on tolls |
C. | Co-ordinates the whole process of manufacturing and manufactures a part, components or products |
D. | Completely manufactures a range of components without significant human inventions during the processing |
Answer» D. Completely manufactures a range of components without significant human inventions during the processing |
22. |
Which of the following is true regarding forward scheduling? Forward scheduling is the scheduling of |
A. | The end items or finished products |
B. | Jobs as soon as the requirements are known |
C. | The start items or component parts |
D. | The final operations first beginning with the due date |
Answer» B. Jobs as soon as the requirements are known |
23. |
Which of the following best describes how short term schedules are prepared? short term schedules are prepared |
A. | Directly from the aggregate plans |
B. | Directly from the capacity plans |
C. | From inventory records for items that have been used up |
D. | From master schedules which are derived from aggregate plans |
Answer» D. From master schedules which are derived from aggregate plans |
24. |
Which scheduling technique should be employed when due dates are important for a job order ? |
A. | Forward scheduling |
B. | Loading |
C. | Dispatching |
D. | Backward scheduling |
Answer» D. Backward scheduling |
25. |
Which of the following is not effectiveness criterion for scheduling? |
A. | Maximizing flow time |
B. | Maximizing completion time |
C. | Minimizing WIP inventory |
D. | Maximizing utilization |
Answer» A. Maximizing flow time |
26. |
Forward scheduling |
A. | Begins with a delivery date ,then each operations is offset one at a time ,in reverse order |
B. | Is well suited where the supplier is usually able to meet precise delivery dates |
C. | Tends to minimize in process inventory |
D. | Assumes that procurement of material and operations start as soon as requirement are known |
Answer» D. Assumes that procurement of material and operations start as soon as requirement are known |
27. |
Which file contain important information regarding on items flow through the shop ? |
A. | Routing file |
B. | Work centre master file |
C. | Control files |
D. | Item master file |
Answer» A. Routing file |
28. |
Which of the following is not a part of the planning files of a production planning and control systems |
A. | A progress file |
B. | A work centre master file |
C. | Minimizing WIP inventory |
D. | Maximizing utilization |
Answer» A. A progress file |
29. |
Which of the following files trucks work order progress ? |
A. | Work centre master files |
B. | Routing files |
C. | Item master files |
D. | Control files |
Answer» D. Control files |
30. |
The production data base containing information about each of the components that a firm produces or purchases is the |
A. | Routing files |
B. | Work centre master files |
C. | Control files |
D. | Item master files |
Answer» D. Item master files |
31. |
The short term scheduling activity called loading |
A. | Assign dates to specific jobs or operations steps |
B. | Specifies the order in which jobs should be done at each center |
C. | Assigns jobs to work centers |
D. | Assign workers to jobs |
Answer» C. Assigns jobs to work centers |
32. |
Sequencing (or dispatching) |
A. | Assign dates to specific jobs or operations |
B. | Assign jobs to work centers |
C. | Specifies the order in which job should be done at each centre |
D. | Assigns workers to jobs |
Answer» C. Specifies the order in which job should be done at each centre |
33. |
Use of sequencing role shortest processing time generally result in |
A. | Minimum average lateness |
B. | Maximum utilization |
C. | Maximum effectiveness |
D. | Minimum average flow time |
Answer» D. Minimum average flow time |
34. |
Resources such as labour materials and energy are known as ……………. In the transformation process |
A. | Output |
B. | Intangibles |
C. | Factors of production |
D. | Inputs |
Answer» D. Inputs |
35. |
The raw materials , components , completed or partially completed products ,and pieces of equipment a firm uses are often referred to as |
A. | Inventory |
B. | Order quantities |
C. | Production |
D. | Outputs |
Answer» A. Inventory |
36. |
In a large company , the department charged with determining the actual process to be used in turning inputs to output is |
A. | Marketing research |
B. | Engineering |
C. | Operations |
D. | Product planning |
Answer» C. Operations |
37. |
Getting products to consumers obtaining and managing raw materials and packaging finished products are all activities of |
A. | Procurement |
B. | Logistics |
C. | Production |
D. | Materials management |
Answer» D. Materials management |
38. |
The development and administration of the activities involved in transforming resources into goods and services is known as |
A. | Operations management |
B. | Manufacturing |
C. | The transformation process |
D. | Production |
Answer» A. Operations management |
39. |
Which of the following is not difference between manufacturers and service providers |
A. | Nature and consumption of output |
B. | Uniformity of inputs |
C. | Uniformity of outputs |
D. | Nature and consumption of input |
Answer» A. Nature and consumption of output |
40. |
The process through which inputs are converted into output is referred to as |
A. | The transformation process |
B. | Manufacturing |
C. | Materials management |
D. | Physical distribution |
Answer» A. The transformation process |
41. |
The degree to which a good or service meets demands and requirements of customers called |
A. | Quality |
B. | Customer satisfaction |
C. | Effectiveness |
D. | Productivity |
Answer» B. Customer satisfaction |
42. |
Making identical , interchangeable components or complete products is referred to as |
A. | Customization |
B. | Standardization |
C. | Engineering |
D. | Mechanization |
Answer» B. Standardization |
43. |
Unique products are generally produced through |
A. | Customization |
B. | Standardization |
C. | Engineering |
D. | Mechanization |
Answer» A. Customization |
44. |
Procurement is another name for |
A. | Consumption |
B. | Disposition |
C. | Budgeting |
D. | Purchasing |
Answer» A. Consumption |
45. |
Which of the following is the sequence of operations through which product must pass |
A. | Scheduling |
B. | Critical path |
C. | Transformation path |
D. | Routing |
Answer» D. Routing |
46. |
A planning systems that schedules the precise quantity of materials needed to make a product is called |
A. | Flexible scheduling |
B. | Cycle time arrangement |
C. | Materials requirements planning |
D. | Economic order quantities |
Answer» C. Materials requirements planning |
47. |
The activities and process used in making both tangible and intangible products is known as |
A. | Manufacturing |
B. | Production |
C. | Operations |
D. | The transformation process |
Answer» B. Production |
48. |
Customers perceptions are important in |
A. | Economic order quantities |
B. | Production schedules |
C. | Product specification |
D. | Quality |
Answer» C. Product specification |
49. |
Which of the following is not a function of purchasing management |
A. | Selecting the source |
B. | Placement of purchase order |
C. | Physical control of materials |
D. | None of these |
Answer» D. None of these |
50. |
Which of the following would not generally be a motive for a firm to hold inventories? |
A. | To decouple or separate parts of the production process |
B. | To provide a stock of goods and will provide a selection for customers |
C. | To take advantage of quantity discounts |
D. | To minimize holding costs |
Answer» D. To minimize holding costs |
51. |
All of the following statements about ABC analysis are true except |
A. | Inventory may be categorized by measures other than dollar volume |
B. | It categorizes on-hand inventory into three groups based on annual dollar volume |
C. | It is an application of the pare to principle |
D. | It states that all items require the same degree of control |
Answer» D. It states that all items require the same degree of control |
52. |
ABC analysis is based upon the principal that |
A. | All items in inventory must be monitored very closely |
B. | These are very usually a few critical items zmd many items which are less critical |
C. | An item is critical if its usage is high |
D. | The safety stock in terms of volume should be higher for a items than for items |
Answer» B. These are very usually a few critical items zmd many items which are less critical |
53. |
Which of the following statements about ABC analysis is false? |
A. | ABC analysis is based on presumption that controlling the few most important items produces the vast majority of inventory savings |
B. | In ABC analysis “A” items are tightly controlled , have accurate records ,and receive regular review by major decision makers |
C. | In ABC analysis “c” items minimal records , periodic review , and single control |
D. | ABC analysis is based on the presumption that all item must be tightly controlled to produce important cost savings |
Answer» D. ABC analysis is based on the presumption that all item must be tightly controlled to produce important cost savings |
54. |
The two most basic inventory questions answered by the typical inventory model are |
A. | Timing and cost of orders |
B. | Quantity and cost of orders |
C. | Timing and quantity of orders |
D. | Order quantity and service level |
Answer» C. Timing and quantity of orders |
55. |
Ascertain type of computer costs 1000 and the annual holding cost is 25% . annual demand is 10000 units , and the order cost is 150 per order .what is the approximate economic order quantity? |
A. | 70 |
B. | 110 |
C. | 250 |
D. | 12000 |
Answer» B. 110 |
56. |
Most inventory models attempt to minimize |
A. | The like hood of stock out |
B. | The number of items ordered |
C. | Total inventory based costs |
D. | The number of orders placed |
Answer» C. Total inventory based costs |
57. |
In basic EOQ model if the cost of placing an order doubles and all other values remain constant the EOQ will |
A. | Increase by about 41% |
B. | Increase by100% |
C. | Increase by200% |
D. | Either increase or decrease |
Answer» A. Increase by about 41% |
58. |
Which of the following statements about the basic EOQ model is true |
A. | If ordering cost were to double , the EOQ would rise |
B. | If annual demand were to double , the EOQ would rise |
C. | If the carrying cost were to increase ,the EOQ would fall |
D. | All of the above statements are true |
Answer» A. If ordering cost were to double , the EOQ would rise |
59. |
Which of the following statements about the basic EOQ model is false? |
A. | If the setup cost were to decrease , the EOQ would fall |
B. | If annual demand were to increase , the EOQ would decrease |
C. | If the ordering cost were to increase , the EOQ would rise |
D. | If annual demand were to double , the EOQ would also double |
Answer» D. If annual demand were to double , the EOQ would also double |
60. |
Time and motion studies focus on |
A. | The time and effort it takes to train a new employee |
B. | The number of physical motion required to complete a work related task |
C. | The ways in which machines can be built to make human safes and more efficient |
D. | Ways to avoid injury in tasks that required repetitive motion |
Answer» B. The number of physical motion required to complete a work related task |
61. |
Scientific management contributed to the development of a more rational approach to management by developing which characteristics? |
A. | The planning and organization of work based on moral principles |
B. | Time and motion studies |
C. | Standardized pay |
D. | The encouragement of trade unions |
Answer» B. Time and motion studies |
62. |
A situations in which manager can make an accurate decision is called |
A. | Certainty |
B. | Uncertainty |
C. | Risk |
D. | Factional |
Answer» A. Certainty |
63. |
Time and motion study was introduced by |
A. | Hennery Fayol |
B. | F.W Taylor |
C. | Gilberth couple |
D. | Adam Smith |
Answer» B. F.W Taylor |
64. |
The fixed position layout would be most appropriate in which of the following cases |
A. | A fast food restaurant |
B. | A doctors office |
C. | A govt. restaurant |
D. | Constructing a Boeing277 |
Answer» D. Constructing a Boeing277 |
65. |
For which of the following operations would a fixed position layout be most appropriate |
A. | Assembly of an automobile |
B. | Production of TV sets |
C. | Construction of ships |
D. | Refining of crude oil |
Answer» D. Refining of crude oil |
66. |
Because the fixed position layout is so difficult to solve on-site operations managers |
A. | Virtually never employ this layout strategy |
B. | Utilize this approach only for construction projects such as bridges and office towers |
C. | Increase in size of site |
D. | Often complete as much of the project as possible off site |
Answer» D. Often complete as much of the project as possible off site |
67. |
One factor impacting the fixed position input strategy is |
A. | Minimizing difficulties caused by material flow varying with each products |
B. | Requiring frequent contact close to one another |
C. | Balancing product flow one work station to the next |
D. | The movement of material to the limited storage areas around the site |
Answer» D. The movement of material to the limited storage areas around the site |
68. |
One of the major advantage of process oriented layout is |
A. | High equipment utilization |
B. | Large work in process inventories |
C. | Flexibility in equipment and labour assignment |
D. | Smooth and continuous flows of work |
Answer» C. Flexibility in equipment and labour assignment |
69. |
The man issue is designing process oriented input concerns the relative positioning of …………… to minimize cost of material handling |
A. | Work stations |
B. | Departments |
C. | Raw materials |
D. | Entrances , loading docks etc. |
Answer» B. Departments |
70. |
A process layout would be most appropriate in which of the following cases |
A. | Constructing a Boeing 777 air craft |
B. | A fast food restaurant |
C. | An automobile factory |
D. | A garment restaurant |
Answer» D. A garment restaurant |
71. |
The major problem addressed |
A. | The movement of material to the storage areas around the site |
B. | Requiring frequent contact close to one another |
C. | The provision of low cost storage with low cost material handling |
D. | Minimizing difficulties caused by material flow varying with each product |
Answer» D. Minimizing difficulties caused by material flow varying with each product |
72. |
The most common tactic followed in process – layout planning is to arrange departments or work centers so they |
A. | Minimize the cost of of skilled labour |
B. | Maximize the machine utilization |
C. | Allocate the available space equally to all the departments |
D. | Minimize the costs of material handling |
Answer» D. Minimize the costs of material handling |
73. |
Process oriented layout is best suited for |
A. | The assembly of products like automobiles and appliances |
B. | The mass production of uniform products |
C. | High volume , low variety production |
D. | Low volume , high variety production |
Answer» D. Low volume , high variety production |
74. |
Which of the following is true for process layouts , hut false for production layouts ? |
A. | Low –in process inventories |
B. | Flexibility in equipment and labour arrangement |
C. | Low variety of products |
D. | High volume of output |
Answer» B. Flexibility in equipment and labour arrangement |
75. |
Big advantage of process oriented layout is |
A. | Its flexibility for variety |
B. | Its low cost |
C. | The simplified scheduling problem presented by this layout strategy |
D. | The ability of employ low skilled labour |
Answer» A. Its flexibility for variety |
76. |
The typical goal used when developing a process oriented layout strategy is to |
A. | Minimize the distance between adjacent departments |
B. | Minimize the material handling costs |
C. | Maximize the number of different tasks which can be performed by an individual machine |
D. | Minimize the level of operator skill necessary |
Answer» B. Minimize the material handling costs |
77. |
The concept of total quality control i.e that quality must be attended to at all stages of the industrial cycle and throughout the organization is the creation of which of the following pioneers ? |
A. | Genichi Taguchi |
B. | W.Edward Deming |
C. | Arnald Feigenbaum |
D. | Joseph M juran |
Answer» C. Arnald Feigenbaum |
78. |
The so-called ‘quality qurus’ of Total Quality Management (TQM) do not include one of the following |
A. | Kavoru ishikawa |
B. | Joseph M juran |
C. | Bill coshy |
D. | W.Edward Deming |
Answer» C. Bill coshy |
79. |
Which of the following would not normally be considered as a ‘costs of quality’ |
A. | Marketing costs |
B. | Prevention costs |
C. | Warranty costs |
D. | Rand D costs |
Answer» D. Rand D costs |
80. |
………………. Focused on the job and how to do it better |
A. | Scientific management |
B. | Bureaucratic management |
C. | Classical management |
D. | Administrative management |
Answer» A. Scientific management |
81. |
What term describes a vertical expansion of job duties in order to give the worker more responsibility? |
A. | Job enlargement |
B. | Job rotation |
C. | Job enrichment |
D. | Job design |
Answer» C. Job enrichment |
82. |
What are the two basic types of production systems? |
A. | Automated and manual |
B. | Intermittent and non-intermittent process |
C. | Normal and continuous process |
D. | Continuous process and batch |
Answer» B. Intermittent and non-intermittent process |
83. |
What type of process would a paper mill be most likely to use? |
A. | Continuous flow |
B. | Project |
C. | Job shop |
D. | Flow shop |
Answer» A. Continuous flow |
84. |
What technique deals with the problem of supplying sufficient facilities to production lines or individuals that require uneven service? |
A. | Supply-demand theory |
B. | PERT |
C. | Inventory theory |
D. | Queuing theory |
Answer» D. Queuing theory |
85. |
A manufacturer has been receiving excessive numbers of defective standard machine parts from a vendor on a regular basis. What is the most effective way to design a formal inspection system for incoming parts? |
A. | Queuing analysis |
B. | Time series analysis |
C. | Statistical quality control |
D. | Regression analysis |
Answer» C. Statistical quality control |
86. |
A set of simultaneous equations that has more variables than constraints has |
A. | no solution |
B. | an infinite number of solutions |
C. | a finite solution |
D. | an infinite solution |
Answer» B. an infinite number of solutions |
87. |
In a PERT/CPM network, computing the critical path requires |
A. | determining the total project duration |
B. | assigning the earliest finish time for an activity as the earliest start time for the next |
C. | that the latest finishing time for an activity not delay the overall project beyond initial expectation |
D. | a sophisticated and complex computer program |
Answer» B. assigning the earliest finish time for an activity as the earliest start time for the next |
88. |
At the completion of the forward and backward passes, the slack for an activity is given by the |
A. | difference between early start and early finish |
B. | difference between early start and latest finish |
C. | difference between latest start and early finish |
D. | amount of idle labor on the critical path |
Answer» A. difference between early start and early finish |
89. |
What type of control chart is used to monitor the number of defects per unit? |
A. | p-chart |
B. | R-chart |
C. | c-chart |
D. | x-bar chart |
Answer» C. c-chart |
90. |
The operating characteristic (OC) curve shows the probability of |
A. | rejection for every possible true percentage of defectives |
B. | acceptance for every possible true percentage of defectives |
C. | making type I errors for various percentages of defectives |
D. | none of the above |
Answer» B. acceptance for every possible true percentage of defectives |
91. |
If an artificial variable remains in the solution with a positive value after the stopping criterion has been reached, the problem |
A. | is infeasible |
B. | is optimal |
C. | needs a new basis |
D. | has more than one solution |
Answer» A. is infeasible |
92. |
. What are the two sources of costs in queuing analysis? |
A. | Arrivals and departures |
B. | Arrivals and idleness |
C. | Waiting customers and capacity |
D. | Equipment breakdowns and departures |
Answer» C. Waiting customers and capacity |
93. |
The transportation model method that is used to evaluate location alternatives minimizes total |
A. | sources |
B. | destinations |
C. | capacity |
D. | shipping costs |
Answer» D. shipping costs |
94. |
What is simulation? |
A. | A quick solution method to problem-solving |
B. | A formalized deterministic approach to problem-solving |
C. | A graphical method to problem-solving |
D. | A trial-and-error approach to problem-solving |
Answer» D. A trial-and-error approach to problem-solving |
95. |
Moving from the aggregate plan to a master production schedule requires |
A. | rough cut capacity planning |
B. | sub-optimization |
C. | disaggregation |
D. | strategy formulation |
Answer» C. disaggregation |
96. |
A fixed interval system |
A. | adds the same predetermined amount to inventory each time replenishment occurs |
B. | is suitable for joint replenishment items |
C. | is triggered at the reorder level |
D. | requires perpetual monitoring of inventory records |
Answer» B. is suitable for joint replenishment items |
97. |
_________is a process in which a supplier generates orders for its distributor based on demand information sent by the distributor |
A. | point of sale |
B. | integrated supply chain management |
C. | distributed control system |
D. | vendor managed inventory |
Answer» D. vendor managed inventory |
98. |
Which of the following classification of scheduling strategies is not practical in case of machine breakdown? |
A. | Cumulative scheduling |
B. | Detailed scheduling |
C. | Cumulative-detailed scheduling |
D. | Priority decision rules |
Answer» B. Detailed scheduling |
99. |
Which of the following chart will indicate only the cumulative workloads for each job and to what extent the work centers are to be scheduled? |
A. | Flowchart |
B. | Gantt chart |
C. | Gantt progress chart |
D. | CPM chart |
Answer» B. Gantt chart |
100. |
________________ is a methodology by which we try to minimize the cost and improve the revenue of a product or an operation. |
A. | Value engineering |
B. | Systems engineering |
C. | Control engineering |
D. | Industrial engineering |
Answer» A. Value engineering |
Done Reading?