McqMate
1. |
Which one of these is responsible for hardness of tablet? |
A. | Die Filling |
B. | Compression force |
C. | Both (a) & (b) |
D. | None of these |
Answer» C. Both (a) & (b) |
2. |
Crown thickness of the tablet is measured by |
A. | Micrometer |
B. | Hydrometer |
C. | Pychnometer |
D. | Any one of the above |
Answer» C. Pychnometer |
3. |
Friablilator is operated for _________ revolutions per minute. |
A. | 100 |
B. | 75 |
C. | 50 |
D. | 25 |
Answer» A. 100 |
4. |
In dissolution test, flask is maintained at: |
A. | 31° C ± 0.5C |
B. | 41° C ± 0.1C |
C. | 39° C ± 0.6C |
D. | 40° C ± 0.1C |
Answer» A. 31° C ± 0.5C |
5. |
Enteric coated tablet disintegrate in ____ hrs in simulated intestinal fluid. |
A. | 1 |
B. | 2 |
C. | 3 |
D. | 4 |
Answer» B. 2 |
6. |
Separation of tablet in 2 or more distinct layer is |
A. | Capping |
B. | Mottling |
C. | Lamination |
D. | Air entrapment |
Answer» C. Lamination |
7. |
Capping is prevented by using: |
A. | Flat |
B. | Circular |
C. | Square |
D. | Rectangular |
Answer» A. Flat |
8. |
Plating of punch forces is done by: |
A. | Chromium |
B. | Zinc |
C. | Iron |
D. | Any of the above |
Answer» A. Chromium |
9. |
Unequal distribution of color is called |
A. | Capping |
B. | Lamination |
C. | Mottling |
D. | None of the above |
Answer» C. Mottling |
10. |
________ is directly compressible excipient |
A. | Spray Dried lactose |
B. | Dibasic calcium phosphate |
C. | None of the above |
D. | Any of the above |
Answer» A. Spray Dried lactose |
11. |
Sta-Rx-1500 contain ______ % of moisture |
A. | 15 |
B. | 10 |
C. | 18 |
D. | 50 |
Answer» B. 10 |
12. |
pH of small intestine is |
A. | 1-2 |
B. | 3-4 |
C. | 6 |
D. | 7-8 |
Answer» D. 7-8 |
13. |
Perforated pan is used for |
A. | Sugar coating |
B. | Film coating |
C. | Both (a) & (b) |
D. | None of the above |
Answer» C. Both (a) & (b) |
14. |
Subcoating is done to |
A. | Round the edges |
B. | Increase in the bulk of tablet |
C. | Both (a) & (b) |
D. | Make water resistant |
Answer» C. Both (a) & (b) |
15. |
Which one is the example of Opacifier |
A. | TiO2 |
B. | MgO |
C. | Silicates |
D. | None of the above |
Answer» A. TiO2 |
16. |
Empty capsule has moisture content in the range of |
A. | 60% |
B. | 12-15% |
C. | 50-70% |
D. | 30% |
Answer» C. 50-70% |
17. |
Which machine is designed for filling of pellets? |
A. | Rotofil |
B. | Rotosort |
C. | Ordinary machine |
D. | None of these |
Answer» A. Rotofil |
18. |
Soft gelatin capsule should not contain more than ____ ppm of iron as impurity? |
A. | 5 |
B. | 15 |
C. | 40 |
D. | 60 |
Answer» B. 15 |
19. |
Enteric resin used for coating is? |
A. | Cellulose acetate Pthalate |
B. | Zein |
C. | Shellac |
D. | All of the above |
Answer» C. Shellac |
20. |
Base for chewable tablets include |
A. | Mannitol |
B. | Glucose |
C. | Lactose |
D. | None |
Answer» A. Mannitol |
21. |
Enteric coated tablet disintegrate in |
A. | Stomach |
B. | Liver |
C. | Intestine |
D. | Mouth |
Answer» C. Intestine |
22. |
Not used as tablet glidant: |
A. | Colloidal Silica |
B. | Starch |
C. | Talc |
D. | Magnesium stearate |
Answer» B. Starch |
23. |
Rotosort is used for |
A. | Sorting filled capsules |
B. | Filling the capsule |
C. | Mixing of powder |
D. | None of the above |
Answer» A. Sorting filled capsules |
24. |
Hardness of tablet is measured by |
A. | Pfizer tester |
B. | Erweka Tester |
C. | Strong Cobb |
D. | All of the above |
Answer» D. All of the above |
25. |
Whiskering (a tablet defect) is observed with the use of _____ punch. |
A. | Convex |
B. | Flat |
C. | Concave |
D. | Biconvex |
Answer» C. Concave |
26. |
Shells of gelatin capsules is made elastic by adding |
A. | Sorbitol |
B. | PEG |
C. | Povidone |
D. | Lactose |
Answer» A. Sorbitol |
27. |
A retardant material that forms a hydrophilic matrix in the formulation of matrix tablet |
A. | HPMC |
B. | CAP |
C. | Polyethylene |
D. | Carnuba Wax |
Answer» D. Carnuba Wax |
28. |
How much amount is accepted to dissolve in a dissolution medium in 20 minute at 50 rpm? |
A. | Not less than 70% |
B. | Not more than 80% |
C. | Not less than 80% |
D. | 80% |
Answer» C. Not less than 80% |
29. |
What’s the role of cam tracks in tablet compression machines? |
A. | For proper movement of the punches |
B. | For proper movement of the granules |
C. | For proper movement of both (granules and punches) |
D. | For movement of granules and hopper |
Answer» A. For proper movement of the punches |
30. |
Which tablet compression machine is best for compression of granules? |
A. | Single Press |
B. | Longitudinal Press |
C. | Rotary Press |
D. | Stamping press |
Answer» C. Rotary Press |
31. |
Low melting point substances causes processing problem in tablets. Identify it. |
A. | Poor Flow |
B. | Weight variation |
C. | Sticking |
D. | Picking |
Answer» C. Sticking |
32. |
Which capsule size number has the maximum capacity? |
A. | 5 |
B. | 1 |
C. | 0 |
D. | 000 |
Answer» D. 000 |
33. |
Gelatin and glycerin are used for the preparation of lamellae in a specified ratio. Identify the correct ratio. |
A. | 1:1 |
B. | 5:1 |
C. | 9:1 |
D. | 10:1 |
Answer» C. 9:1 |
34. |
The 000 size capsules can fill the volume of: |
A. | 1.36 ml |
B. | 0.13 ml |
C. | 0.96 ml |
D. | 0.25 ml |
Answer» A. 1.36 ml |
35. |
Which of the following material is not used in extrusion? |
A. | Wax |
B. | Granules |
C. | Powders |
D. | Pellets |
Answer» A. Wax |
36. |
What is the name of the phase transition that occurs when a solid is converted directly into a gas (without going through the liquid phase)? |
A. | Melting |
B. | Boiling |
C. | Condensing |
D. | Sublimation |
Answer» D. Sublimation |
37. |
_______ is used for bulk handling, warehouse storage and transport shipping. The most common form is a palletized unit load that packs tightly into containers. |
A. | Primary packaging |
B. | Tertiary packaging |
C. | Quaternary packaging |
D. | Secondary packaging |
Answer» B. Tertiary packaging |
38. |
Packaging Testing includes: |
A. | Shock test and drop test |
B. | Vibration test |
C. | Inclined Impact test |
D. | All of the above |
Answer» D. All of the above |
39. |
Disadvantages of plastic material in packaging? |
A. | Release alkali to aqueous preparation |
B. | It is fragile so easily broken |
C. | They react with certain chemicals |
D. | Absorption permeable to moisture |
Answer» D. Absorption permeable to moisture |
40. |
Iron oxide, magnesium dioxide and chromium dioxide is the composition of ______ colored glass use in pharmaceutical packaging? |
A. | Yellow |
B. | Blue |
C. | Green |
D. | Amber |
Answer» C. Green |
41. |
Treated Soda lime glass is called as: |
A. | Type I |
B. | Type II |
C. | Type III |
D. | NP- Non Parentral |
Answer» B. Type II |
42. |
Powered glass test used for the standardization of which type of glass material: |
A. | Type I, II & III |
B. | Type I, III, IV |
C. | Type II, III, IV |
D. | All of the above |
Answer» B. Type I, III, IV |
43. |
Correct test for standardization of rubber material |
A. | Leakage test/ Collapsibility |
B. | Powder glass test |
C. | Fragmentation test |
D. | Hydraulic test |
Answer» C. Fragmentation test |
44. |
The main aim of package inserts or leaflets is: |
A. | To provide information essential for the safe and effective use of the drugs |
B. | Reducing the number of adverse reactions |
C. | Adequate direction of use |
D. | All of the above |
Answer» D. All of the above |
45. |
“Blue” color coding is used for which class of pharmaceutical products? |
A. | Miotics |
B. | Beta blockers |
C. | NSAIDS |
D. | Analgesic |
Answer» A. Miotics |
46. |
“Tan” color coding is used for which class of pharmaceutical products? |
A. | Miotics |
B. | Beta blockers |
C. | NSAIDS |
D. | Anti infectives |
Answer» D. Anti infectives |
47. |
“Orange” color coding is used for which class of pharmaceutical products? |
A. | Antibiotics |
B. | Beta blockers |
C. | NSAIDS |
D. | Anti-infectives |
Answer» A. Antibiotics |
48. |
“Pink” color coding is used for which class of pharmaceutical products? |
A. | Antibiotics |
B. | Beta blockers |
C. | Steroids |
D. | Anti-infectives |
Answer» C. Steroids |
49. |
Select the equation that gives the rate of drug dissolution from a tablet: |
A. | Fick’s Law |
B. | Henderson-Hasselbatch equation |
C. | Noyes-Whitney equation |
D. | Michaelis Menton equation |
Answer» C. Noyes-Whitney equation |
50. |
How many tablets require for content uniformity test |
A. | 10 |
B. | 20 |
C. | 30 |
D. | 40 |
Answer» C. 30 |
51. |
Enteric coated tablet is dissolved in 0.1 N HCl as per I.P. |
A. | 180 minutes |
B. | 120 minutes |
C. | 45 minutes |
D. | 60 minutes |
Answer» B. 120 minutes |
52. |
During compression, entrapped air may lead to: |
A. | Capping & lamination |
B. | Picking & sticking |
C. | Binding & sticking |
D. | Ejection & Removal |
Answer» A. Capping & lamination |
53. |
Anhydrous lactose has advantage over hydrous lactose. |
A. | Improved flow |
B. | Absence of milliard reaction |
C. | Improved Compressibility |
D. | High microbial load |
Answer» B. Absence of milliard reaction |
54. |
If the dose of the drug is inadequate, then it generally requires the following one, to make up its bulk: |
A. | Binders |
B. | Disintegrants |
C. | Lubricants |
D. | Diluents |
Answer» D. Diluents |
55. |
The first and most widely used diluent in tablet formulation is |
A. | Dextrose |
B. | Lactose |
C. | MCC |
D. | Starch |
Answer» B. Lactose |
56. |
Which of the following is a synthetic adhesive? |
A. | PVP |
B. | MC |
C. | HPMC |
D. | HPC |
Answer» A. PVP |
57. |
Which of the following packaging is commonly used for packaging of capsules? |
A. | Blister |
B. | Strip |
C. | Both |
D. | None |
Answer» C. Both |
58. |
Which of the following is used to fill powdered dry solid into soft gelatin capsules? |
A. | Accogel |
B. | Rotofil |
C. | Rotosort |
D. | Rotoweigh |
Answer» A. Accogel |
59. |
Sealing of capsules is achieved by: |
A. | 100 °C |
B. | 20 °C |
C. | 37 °C – 40 °C |
D. | 70 °C |
Answer» C. 37 °C – 40 °C |
60. |
Find the correct one. |
A. | 000 largest size |
B. | 00 Largest size |
C. | 5 smallest size |
D. | Both A and C are correct |
Answer» D. Both A and C are correct |
61. |
Which is a capsule filling machine? |
A. | Osaka |
B. | Jaansan |
C. | Macofar |
D. | All of the above |
Answer» D. All of the above |
62. |
Iron content of gelatin for hard and soft gelatin capsule: |
A. | NMT 5 ppm |
B. | NMT 10 ppm |
C. | NMT 25 ppm |
D. | NMT 15 ppm |
Answer» D. NMT 15 ppm |
63. |
Gelatin is hydrolysed product: |
A. | Pectin |
B. | Tannin |
C. | Shellac |
D. | Collagen |
Answer» D. Collagen |
64. |
Moisture content of capsule is determined by: |
A. | IR Spectroscopy |
B. | Toulene distillation method |
C. | Accogel machine |
D. | Erweka key |
Answer» B. Toulene distillation method |
65. |
____________ treatment is used for the solubility of gelatin. |
A. | Heat |
B. | Formalin |
C. | Alcohol |
D. | Formalin |
Answer» B. Formalin |
66. |
Type A gelatin has its isoelectric point in the region of |
A. | pH 4.7 |
B. | pH 9.0 |
C. | pH 7.4 |
D. | pH 9.4 |
Answer» B. pH 9.0 |
67. |
In capsules, Elancofil and accofil machine is used for |
A. | Filling of powder into capsules |
B. | Filling pellets into capsules |
C. | Sorting filled capsule |
D. | Filling liquids into capsules |
Answer» A. Filling of powder into capsules |
68. |
In capsules, Qualiseal machine is used for: |
A. | Sorting the filled capsules |
B. | Filling the liquids into capsules |
C. | Filling pellets into capsules |
D. | Filling powder into capsules |
Answer» B. Filling the liquids into capsules |
69. |
Sulphur dioxide is used for: |
A. | As a coloring agent |
B. | To prevent bitterness |
C. | To prevent decomposition of gelatin shell |
D. | None of the above |
Answer» C. To prevent decomposition of gelatin shell |
70. |
Green bones are used for the preparation of gelatin of the type: |
A. | Type A |
B. | Type B |
C. | Type C |
D. | A & B |
Answer» B. Type B |
71. |
Viscosity of gelatin ranges from: |
A. | 8-10 millipoise |
B. | 60-80 millipoise |
C. | 2-10 millipoise |
D. | 25-45 millipoise |
Answer» D. 25-45 millipoise |
72. |
The approximate particle size of microcapsule using solvent evaporation is: |
A. | 5-5000 µm |
B. | 100-10,000 µm |
C. | 10-100 µm |
D. | 5-10 µm |
Answer» A. 5-5000 µm |
73. |
Which of the following is a tamper proof dosage form? |
A. | Tablet |
B. | Capsule |
C. | Dry powder |
D. | Syrup |
Answer» A. Tablet |
74. |
Weight variation limits as per USP for the tablet weight more than 324 mg: |
A. | 7.5 mg |
B. | 7.5% |
C. | 5% |
D. | 5 mg |
Answer» C. 5% |
75. |
Apparatus 1 as per USP: |
A. | Flow-through cell |
B. | Paddle |
C. | Basket |
D. | Reciprocating cylinder |
Answer» C. Basket |
76. |
What is different in B tooling and D tooling? |
A. | Punch and die length are different |
B. | Punch length same but die length different |
C. | Punch and die diameter are different |
D. | Punch diameter same but die diameter different |
Answer» C. Punch and die diameter are different |
77. |
Ratio of methyl paraben and propyl paraben used as preservative in capsule? |
A. | 4:1 |
B. | 1:4 |
C. | 1:2 |
D. | 1:1 |
Answer» A. 4:1 |
78. |
Dispirin is a? |
A. | Dispersible tablet |
B. | Soluble tablet |
C. | Effervescent tablet |
D. | None of the above |
Answer» A. Dispersible tablet |
79. |
For Sugar Coated tablet, the specified disintegration time is: |
A. | 60 min. |
B. | 120 min. |
C. | 30 min. |
D. | 15 min. |
Answer» A. 60 min. |
80. |
Adhesion of tablet material to die wall is called: |
A. | Sticking |
B. | Picking |
C. | Capping |
D. | Mottling |
Answer» A. Sticking |
81. |
Which of the following is responsible for sticking? |
A. | Excessive moisture |
B. | Low moisture |
C. | Both |
D. | None |
Answer» A. Excessive moisture |
82. |
Which of the following is not a commercially available Starch product? |
A. | Sta-Rx 1500 |
B. | Celutab |
C. | Emdex |
D. | Sugar tab |
Answer» D. Sugar tab |
83. |
Aerosil is used as a: |
A. | Glidant |
B. | Lubricant |
C. | Antiadherent |
D. | None |
Answer» A. Glidant |
84. |
Tablets that are placed between cheek and teeth are known as: |
A. | Buccal |
B. | Sublingual |
C. | Lozenges |
D. | Troches |
Answer» A. Buccal |
85. |
Flow rate of granules from the hopper can be improved by adding: |
A. | Disintegrants |
B. | Glidants |
C. | Binders |
D. | Lubricant |
Answer» B. Glidants |
86. |
The aim of Sub-coating is: |
A. | To increase the bulkiness |
B. | To avoid deterioration due to microbial attack |
C. | To prevent solubility in acidic medium |
D. | To avoid stickiness |
Answer» A. To increase the bulkiness |
87. |
The following ingredients are commonly used as coating agents for film coating except: |
A. | CAP |
B. | Carnuba Wax |
C. | HEC |
D. | Sodium CMC |
Answer» B. Carnuba Wax |
88. |
The Wurster process can be used for: |
A. | Coating |
B. | To determine disintegration time |
C. | Gas sterilize parenteral solution |
D. | Automatic filling of capsules |
Answer» A. Coating |
89. |
In tablet formulation, PVP is used mainly as: |
A. | Glidant |
B. | Diluent |
C. | Lubricant |
D. | Binder |
Answer» D. Binder |
90. |
Use of cross povidone in tablet formulation: |
A. | Binder |
B. | Disintegrant |
C. | Flow enhancer |
D. | Lubricant |
Answer» B. Disintegrant |
91. |
Use of colloidal silicone dioxide in tablet formulation: |
A. | Diluent |
B. | Disintegrant |
C. | Glidant |
D. | Lubricant |
Answer» C. Glidant |
92. |
Boxes and cartons are covered in which type of packaging in pharmaceutical? |
A. | Primary |
B. | Secondary |
C. | Tertiary |
D. | Quaternary |
Answer» B. Secondary |
93. |
____________ is the best pharmaceutical packaging film for tablets, capsules, which is taking place of PVC film. |
A. | Ply bean foil |
B. | Quick sol foil |
C. | Silly-silly foil |
D. | Alu-alu foil |
Answer» D. Alu-alu foil |
94. |
Which of the following polymer is widely used in film coating of tablets? |
A. | Acacia |
B. | Syrup |
C. | HPMC |
D. | Starch |
Answer» C. HPMC |
95. |
Lamination is: |
A. | Separation of a tablet into two or more distinct layer |
B. | Partial & complete separation of top & bottom crowns of the tablet from the main body of the tablet |
C. | Process of sub-coating |
D. | None of the above |
Answer» A. Separation of a tablet into two or more distinct layer |
96. |
Seal coat aim is to: |
A. | To prevent moisture deposition |
B. | To round the edge and build the tablet size |
C. | To smoothen the surface |
D. | To prevent the tablet from breaking due to vibration |
Answer» A. To prevent moisture deposition |
97. |
Which of the following ingredient is used for polishing of sugar coated tablets |
A. | Gelatin |
B. | Talc |
C. | PEG 4000 |
D. | Carnauba wax |
Answer» D. Carnauba wax |
98. |
____________ decreases the bioavailability of tetracycline. |
A. | Lactose |
B. | DCP |
C. | Starch |
D. | MCC |
Answer» B. DCP |
99. |
The first stage of wetting on addition of a granulating agent to the powders is characterized by which one of the followings? |
A. | Capillary state |
B. | Pendular state |
C. | Funicular state |
D. | Droplet state |
Answer» A. Capillary state |
100. |
Larger values of Ky in the Heckel Plot indicate formation of what quality of tablets? |
A. | Harder tablets |
B. | Soft tablets |
C. | Brittle tablets |
D. | Fluffy tablets |
Answer» A. Harder tablets |
Done Reading?