In a forced vortex motion, the velocity of flow is

Related MCQs

• Volume flow rate of water in a Francis turbine runner is 25 m3/s. The flow velocity, whirl velocity and blade velocity are 11 m/s, 10 m/s and 5 m/s respectively, all values given at runner inlet. Find the power developed by the turbine.
• The depth ‘d’ below the free surface at which the point velocity is equal to the average velocity of flow for a uniform laminar flow with a free surface, will be (where D is the depth of flow.)
• Power developed by Francis turbine are calculated for a certain set of conditions. Now, the inlet whirl velocity is doubled, the blade velocity at inlet is doubled and the flow velocity is quartered. The power developed:
• In the inlet velocity triangle of a Kaplan turbine, α1 = 45o. The velocity of flow at inlet = 10 m/s. Find the whirl velocity of water at the inlet of Kaplan turbine?
• Flow at constant rate through a tapering pipe is i) steady flow ii) uniform flow iii) unsteady flow iv) non-uniform flow The correct answer is
• The velocity of the flow at the inlet of Kaplan turbine is V. In an experimental setup, what could be the possible value of the velocity of the flow at the outlet of Kaplan turbine?
• The velocity at which the flow changes from laminar flow to turbulent flow is called
• The relative velocity of water at the inlet of the Kaplan turbine is 7 m/s. β1 = 75o. The whirl velocity of the water at inlet is 10 m/s. Find the blade velocity of the turbine?
• Surge wave in a rectangular channel is an example of i) steady flow ii) unsteady flow iii) uniform flow iv) non-uniform flow The correct answer is
• In Inward radial flow reaction turbine the ratio of tangential velocity at inlet to the given velocity