In which of the following unit operations, the selectivity is an important parameter?

Related MCQs

• In liquid extraction, if the selectivity is unity, then
• Selectivity of the solvent used in solvent extraction should be
• Which of the following unit operations makes use of Thiele-Geddes equation?
• For which of the following unit operations, Lewis number is of significance?
• H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S has to be reduced from 0.05 to 0.001 mole fraction in the gas side. The height of the tower (in metres) corresponding to an operating line given by, y = 5x + 0.001 is
• For the gas absorption, the height of a transfer unit, based on the gas phase is given by (G: superficial molar gas velocity, L: superficial molar liquid velocity, FG: mass transfer co-efficient, moles/m2, a: interfacial area per unit volume of tower)
• Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the solvent flow, rate is 400 moles of S/m2 . hr. The equilibrium data is represented by Y = 3X2 , where Y is in moles of a A/moles of B and X is in moles A/moles of S. The maximum percentage extraction achieved in the unit is
• Which of the following operations does not involve leaching?
• Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations.
• __________ column is the most suitable for achieving the best performance for mass transfer operations involving liquid with dispersed solids.