Generally steam turbines in power station operate at

Related MCQs

• In a throttle governed single cylinder steam engine 5 I.H.P. is developed when steam consumption is 50 kg per hour and 2 I.H.P. is developed when the steam consumption is 26 kg per hour. The steam consumptions when the engine develops 4 I.H.P. will be
• A steam turbine in which a part of the steam turbine after partial expansion is used for process heating and the remaining steam is further expanded for power generation, is known as
• For steam engine having a throttle governor, a straight line is obtained when the total weight of steam used per hour is plotted against the indicated horse power. This line is known as
• Regenerative feed heating of steam turbines is done primarily to
• The value of reheat factor in case of steam turbines is usually
• The main purpose of compounding in case of steam turbines is to
• The pressure of steam generated in a boiler as recorded by the Bourdon pressure gauge was 2.2 kg/sq-cm. If the barometer reads 774 mm of mercury the absolute pressure of steam would be
• Excessive moisture in steam in a steam turbine is likely to result in
• Which of the following is a part of reciprocating steam engine and not a part of steam turbine plant?
• Reheating of steam for steam turbine cycle is done primarily to