The thermal efficiency of steam turbine can be increased by

Related MCQs

• A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
• A steam turbine in which a part of the steam turbine after partial expansion is used for process heating and the remaining steam is further expanded for power generation, is known as
• A gas turbine cycle with regenerator has a thermal efficiency of 26%. If intercooler and reheater are also introduced what could be expected thermal efficiency
• In a throttle governed single cylinder steam engine 5 I.H.P. is developed when steam consumption is 50 kg per hour and 2 I.H.P. is developed when the steam consumption is 26 kg per hour. The steam consumptions when the engine develops 4 I.H.P. will be
• Excessive moisture in steam in a steam turbine is likely to result in
• Which of the following is a part of reciprocating steam engine and not a part of steam turbine plant?
• Reheating of steam for steam turbine cycle is done primarily to
• Overall thermal efficiency of a thermal power plant is
• Rankine cycle efficiency for fixed steam temperature of any volume upto critical temperature will be maximum for steam pressure of
• The air standard efficiency of a turbine cycle is 56.5%, which one of the following may be Carnot efficiency between the temperature limits of the cycle?