With reference to a safety valve the blow down pressure is the pressure at which

Related MCQs

• Safety valve generally used on high pressure boiler is
• In a four stroke engine if a valve opens 25? before B.D.C. and closes 10? after T.D.C. the valve should be
• High steam and low water safety valve is not used on which of the following boiler?
• A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
• The pressure of steam generated in a boiler as recorded by the Bourdon pressure gauge was 2.2 kg/sq-cm. If the barometer reads 774 mm of mercury the absolute pressure of steam would be
• A D-slide valve is used in
• Inlet valve of a IC engine remains open for
• Which one of the following is a safety device on a compressor?
• In a diesel engine the inlet pressure is more than the atmospheric pressure. Therefore; it can be concluded that
• The total length of 40 mid-ordinates on a simple steam engine indicator diagram is 17 cm. The pressure scale is 0.6 kg/sq-cm. The mean effective pressure would be