For beam of length L fixed at two ends A and B and loaded W at the centre C the maximum bending moment will

Related MCQs

• For a beam of length L fixed at one end, supported at the other and loaded W at the centre C the maximum bending moment with occur at
• The maximum bending moment for a simply supported beam with a gradually varying load from zero at both ends and w per metre at the centre, lies at the centre of a beam.
• A prismatic beam fixed at both ends carries a uniformly distributed load. The ratio of bending moment at the supports to the bending moment at mid-span is
• For a beam of length L fixed at end A and simply supported at end B and loaded uniformly by a load W the maximum bending moment will occur at
• The bending moment diagram for a cantilever beam subjected to bending moment at the end of the beam would be
• The bending moment at the centre of a simply supported beam with a gradually varying load from zero at both ends to w per metre at the centre is wl / 4.
• A beam of overall length / rests on two simple supports with equal overhangs on both sides. Two equal loads act at the free ends. If the deflection at the centre of the beam is the same as at either end, then the length of either overhang is
• The maximum bending moment of a cantilever beam of length l and carrying a uniformly distributed load of w per unit length lies at the middle of its length.
• A cantilever beam carries a uniformly distributed load from fixed end to the centre of the beam in the first case and a uniformly distributed load of same inten¬sity from centre of the beam to the free end in the second case. The ratio of deflections in the two cases is
• A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to