The safe stress for a hollow steel column which carries an axial load of 2100 kN is 125 MN/m2. if the external diameter of the column is 30cm, what will be the internal diameter?

Related MCQs

• A bar 2 m long and 20 mm diameter is subjected to an axial pull of 125.6 KN. Due to this load, length increases by 4 mm and diameter reduce by 0.012 mm. Find Poison‟s ratio.
• The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 kN/cm2, the permissible maximum crippling load will be
• A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is
• The ultimate shear stress of a mild steel plate of 10 mm thickness is 350 N/mm2. Calculate the diameter of the hole that can be punched to it without exceeding a compressive stress of 700 N/mm2.
• steel bar 10 mm x 10 mm cross section is subjected to an axial tensile load of 20kN. If the length of bar is 1 m and E = 200 GPa, then elongation of the bar is:
• A composite section of R.C.C. column 300mm×300mm in section having 20mm diameter 4 bars, one at each corner. Strength of concrete is 5 N/mm2 and modular ratio Es/Ec=9. Calculate load taken by column.
• In a cantilever subjected to a combination of concentrated load, uniformly distributed load and uniformly varying load, Maximum bending moment is
• An axial pull of 50 KN is suddenly applied to a steel bar 2 m long and 1000 mm2 in cross-section. If modulus of elasticity is 200 GPa, find strain energy stored in the bar
• Euler's formula states that the buckling load P for a column of length l, both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are I and E respectively, is given by the relation
• A 10 m long cantilever beam is fixed at point B. What is the bending moment at point B, if 5 m span of AC carries uniform distributed load of 10 kN/m