McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Computer Science Engineering (CSE) , Electrical Engineering , Bachelor of Science in Computer Science TY (BSc CS) , Bachelor of Science in Information Technology FY (BSc IT) , Bachelor of Science in Information Technology SY (BSc IT) .
| 251. |
The data bit to be transmitted are broken into discrete __________ at the data link layer. |
| A. | frame |
| B. | stuff |
| C. | character |
| D. | data |
| Answer» A. frame | |
| 252. |
A standard mechanism provided by internet which helps in copying a file from one host to another is known as ________. |
| A. | smtp |
| B. | dns server |
| C. | telnet |
| D. | ftp |
| Answer» D. ftp | |
| 253. |
Which one of the below is not an component of Internet mail system |
| A. | user agent |
| B. | smtp sender |
| C. | smtp receiver |
| D. | transfer agent |
| Answer» D. transfer agent | |
| 254. |
How many layers are present in the Internet protocol stack (TCP/IP model)? |
| A. | 5 |
| B. | 7 |
| C. | 6 |
| D. | 10 |
| Answer» A. 5 | |
| 255. |
Application layer is implemented in ____________ |
| A. | end system |
| B. | nic |
| C. | ethernet |
| D. | packet transport |
| Answer» A. end system | |
| 256. |
Transport layer is implemented in ______________ |
| A. | end system |
| B. | nic |
| C. | ethernet |
| D. | signal transmission |
| Answer» A. end system | |
| 257. |
The functionalities of the presentation layer include ____________ |
| A. | data compression |
| B. | data encryption |
| C. | data description |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 258. |
Delimiting and synchronization of data exchange is provided by __________ |
| A. | application layer |
| B. | session layer |
| C. | transport layer |
| D. | link layer |
| Answer» B. session layer | |
| 259. |
Physical or logical arrangement of network is __________ |
| A. | topology |
| B. | routing |
| C. | networking |
| D. | control |
| Answer» A. topology | |
| 260. |
Which network topology requires a central controller or hub? |
| A. | star |
| B. | mesh |
| C. | ring |
| D. | bus |
| Answer» A. star | |
| 261. |
Data communication system spanning states, countries, or the whole world is ________ |
| A. | lan |
| B. | wan |
| C. | man |
| D. | pan |
| Answer» B. wan | |
| 262. |
Data communication system within a building or campus is________ |
| A. | lan |
| B. | wan |
| C. | man |
| D. | pan |
| Answer» A. lan | |
| 263. |
Which of this is not a guided media? |
| A. | fiber optical cable |
| B. | coaxial cable |
| C. | wireless lan |
| D. | copper wire |
| Answer» C. wireless lan | |
| 264. |
Coaxial cable consists of _______ concentric copper conductors. |
| A. | 1 |
| B. | 2 |
| C. | 3 |
| D. | 4 |
| Answer» B. 2 | |
| 265. |
Fiber optics posses following properties __________ |
| A. | immune electromagnetic interference |
| B. | very less signal attenuation |
| C. | very hard to tap |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 266. |
If an Optical Carrier is represented as OC-n, generally the link speed equals(in Mbps) __________ |
| A. | n*39.8 |
| B. | n*51.8 |
| C. | 2n*51.8 |
| D. | none of the mentioned |
| Answer» B. n*51.8 | |
| 267. |
Radio channels are attractive medium because __________ |
| A. | can penetrate walls |
| B. | connectivity can be given to mobile user |
| C. | can carry signals for long distance |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 268. |
Geostationary satellites ___________ |
| A. | are placed at a fixed point above the earth |
| B. | rotate the earth about a fixed axis |
| C. | rotate the earth about a varying axis |
| D. | all of the mentioned |
| Answer» A. are placed at a fixed point above the earth | |
| 269. |
Bits can be sent over guided and unguided media as analog signal by ___________ |
| A. | digital modulation |
| B. | amplitude modulation |
| C. | frequency modulation |
| D. | phase modulation |
| Answer» A. digital modulation | |
| 270. |
The physical layer provides __________ |
| A. | mechanical specifications of electrical connectors and cables |
| B. | electrical specification of transmission line signal level |
| C. | specification for ir over optical fiber |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 271. |
In asynchronous serial communication the physical layer provides ___________ |
| A. | start and stop signalling |
| B. | flow control |
| C. | both start & stop signalling and flow control |
| D. | only start signalling |
| Answer» C. both start & stop signalling and flow control | |
| 272. |
The physical layer is responsible for __________ |
| A. | line coding |
| B. | channel coding |
| C. | modulation |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 273. |
Wireless transmission of signals can be done via ___________ |
| A. | radio waves |
| B. | microwaves |
| C. | infrared |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 274. |
Transmission control protocol ___________ |
| A. | is a connection-oriented protocol |
| B. | uses a three way handshake to establish a connection |
| C. | receives data from application as a single stream |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 275. |
Datagram networks mainly refers to _________ |
| A. | connection oriented networks |
| B. | connection less networks |
| C. | telephone networks |
| D. | internetwork |
| Answer» B. connection less networks | |
| 276. |
The network layer is concerned with __________ of data. |
| A. | bits |
| B. | frames |
| C. | packets |
| D. | bytes |
| Answer» C. packets | |
| 277. |
Which one of the following is not a function of network layer? |
| A. | routing |
| B. | inter-networking |
| C. | congestion control |
| D. | error control |
| Answer» D. error control | |
| 278. |
In virtual circuit network each packet contains ___________ |
| A. | full source and destination address |
| B. | a short vc number |
| C. | only source address |
| D. | only destination address |
| Answer» B. a short vc number | |
| 279. |
Which of the following routing algorithms can be used for network layer design? |
| A. | shortest path algorithm |
| B. | distance vector routing |
| C. | link state routing |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 280. |
Which of the following is not correct in relation to multi-destination routing? |
| A. | is same as broadcast routing |
| B. | contains the list of all destinations |
| C. | data is not sent by packets |
| D. | there are multiple receivers |
| Answer» C. data is not sent by packets | |
| 281. |
A subset of a network that includes all the routers but contains no loops is called ________ |
| A. | spanning tree |
| B. | spider structure |
| C. | spider tree |
| D. | special tree |
| Answer» A. spanning tree | |
| 282. |
Which one of the following algorithm is not used for congestion control? |
| A. | traffic aware routing |
| B. | admission control |
| C. | load shedding |
| D. | routing information protocol |
| Answer» D. routing information protocol | |
| 283. |
The network layer protocol for internet is __________ |
| A. | ethernet |
| B. | internet protocol |
| C. | hypertext transfer protocol |
| D. | file transfer protocol |
| Answer» B. internet protocol | |
| 284. |
ICMP is primarily used for __________ |
| A. | error and diagnostic functions |
| B. | addressing |
| C. | forwarding |
| D. | routing |
| Answer» A. error and diagnostic functions | |
| 285. |
Which of the following are transport layer protocols used in networking? |
| A. | tcp and ftp |
| B. | udp and http |
| C. | tcp and udp |
| D. | http and ftp |
| Answer» C. tcp and udp | |
| 286. |
Which one of the following is a version of UDP with congestion control? |
| A. | datagram congestion control protocol |
| B. | stream control transmission protocol |
| C. | structured stream transport |
| D. | user congestion control protocol |
| Answer» A. datagram congestion control protocol | |
| 287. |
A _____ is a TCP name for a transport service access point. |
| A. | port |
| B. | pipe |
| C. | node |
| D. | protocol |
| Answer» A. port | |
| 288. |
Transport layer protocols deals with ____________ |
| A. | application to application communication |
| B. | process to process communication |
| C. | node to node communication |
| D. | man to man communication |
| Answer» B. process to process communication | |
| 289. |
Which of the following is a transport layer protocol? |
| A. | stream control transmission protocol |
| B. | internet control message protocol |
| C. | neighbor discovery protocol |
| D. | dynamic host configuration protocol |
| Answer» A. stream control transmission protocol | |
| 290. |
Which of the following computer networks is built on the top of another network? |
| A. | prior network |
| B. | chief network |
| C. | prime network |
| D. | overlay network |
| Answer» D. overlay network | |
| 291. |
In computer network nodes are _________ |
| A. | the computer that originates the data |
| B. | the computer that routes the data |
| C. | the computer that terminates the data |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 292. |
Communication channel is shared by all the machines on the network in ________ |
| A. | broadcast network |
| B. | unicast network |
| C. | multicast network |
| D. | anycast network |
| Answer» A. broadcast network | |
| 293. |
Bluetooth is an example of __________ |
| A. | personal area network |
| B. | local area network |
| C. | virtual private network |
| D. | wide area network |
| Answer» A. personal area network | |
| 294. |
A list of protocols used by a system, one protocol per layer, is called ________ |
| A. | protocol architecture |
| B. | protocol stack |
| C. | protocol suite |
| D. | protocol system |
| Answer» B. protocol stack | |
| 295. |
Network congestion occurs _________ |
| A. | in case of traffic overloading |
| B. | when a system terminates |
| C. | when connection between two nodes terminates |
| D. | in case of transfer failure |
| Answer» A. in case of traffic overloading | |
| 296. |
Which of this is not a constituent of residential telephone line? |
| A. | a high-speed downstream channel |
| B. | a medium-speed downstream channel |
| C. | a low-speed downstream channel |
| D. | an ultra-high speed downstream channel |
| Answer» C. a low-speed downstream channel | |
| 297. |
DSL telcos provide which of the following services? |
| A. | wired phone access |
| B. | isp |
| C. | wired phone access and isp |
| D. | network routing and isp |
| Answer» C. wired phone access and isp | |
| 298. |
The function of DSLAM is to __________ |
| A. | convert analog signals into digital signals |
| B. | convert digital signals into analog signals |
| C. | amplify digital signals |
| D. | de-amplify digital signals |
| Answer» A. convert analog signals into digital signals | |
| 299. |
Which of the following terms is not associated with DSL? |
| A. | dslam |
| B. | co |
| C. | splitter |
| D. | cmts |
| Answer» D. cmts | |
| 300. |
HFC contains _______ |
| A. | fibre cable |
| B. | coaxial cable |
| C. | a combination of fibre cable and coaxial cable |
| D. | twisted pair cable |
| Answer» C. a combination of fibre cable and coaxial cable | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.