McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Computer Science Engineering (CSE) , Information Technology Engineering (IT) , Bachelor of Science in Computer Science TY (BSc CS) , Bachelor of Science in Information Technology TY (BSc IT) , Bachelor of Science in Information Technology (BSc IT) .
| 151. |
"The degree to which a set of inherent characteristics of an object fulfils requirements" is known as |
| A. | conformity |
| B. | quality |
| C. | grade |
| D. | none of the above. |
| Answer» A. conformity | |
| 152. |
Which of the following is not one of the seven Quality Management Principles? |
| A. | system approach to management |
| B. | engagement of people |
| C. | leadership |
| D. | customer focus |
| Answer» A. system approach to management | |
| 153. |
The role of management is to ____________________ |
| A. | provide resources |
| B. | monitor the effectiveness of the system |
| C. | both a and b |
| D. | none of the above. |
| Answer» C. both a and b | |
| 154. |
ISO – 14001 gives stress on ___________ |
| A. | plan – do -check -act |
| B. | environmental protection |
| C. | prevention rather than detection |
| D. | all of the above |
| Answer» D. all of the above | |
| 155. |
Service Assurance is _______ |
| A. | confidence with customer |
| B. | customer has trust |
| C. | employee has knowledge |
| D. | all of the above |
| Answer» D. all of the above | |
| 156. |
When a manager monitors the work performance of workers in his department to determine if the quality of their work is 'up to standard', this manager is engaging in which function? |
| A. | planning |
| B. | controlling |
| C. | organizing |
| D. | leadig |
| Answer» B. controlling | |
| 157. |
What are the three C'c of TQM? |
| A. | cultural, country, commitment |
| B. | cultural, comunication and commitment |
| C. | cultural, comunication and contribution |
| D. | none of the above |
| Answer» C. cultural, comunication and contribution | |
| 158. |
______________ is not a process tools for TQM systems |
| A. | process flow analysis |
| B. | histograms |
| C. | lpier |
| D. | control of chart |
| Answer» C. lpier | |
| 159. |
Processes that operate with "six sigma quality" over the short term are assumed to produce long-term defect levels below defects per million opportunities (DPMO). |
| A. | 2.4 |
| B. | 2 |
| C. | 3 |
| D. | 3.4 |
| Answer» D. 3.4 | |
| 160. |
______________ are used in six sigma |
| A. | black belt |
| B. | green belt |
| C. | both a and b |
| D. | none of the above |
| Answer» C. both a and b | |
| 161. |
Customers are primarily concerned with ______________ |
| A. | communicatio n, courtesy, and credibility of the sales person |
| B. | competence, courtesy, and security of the sales person |
| C. | competence, responsiveness, and reliability of the sales person |
| D. | communication, responsiveness, and cleverness of the sales person |
| Answer» A. communicatio n, courtesy, and credibility of the sales person | |
| 162. |
Assured quality is necessary for building customer confidence. |
| A. | correct |
| B. | correct to some extent |
| C. | correct to great extent |
| D. | incorrect |
| Answer» A. correct | |
| 163. |
"Quality is defined by the customer" is |
| A. | an unrealistic definition of quality |
| B. | a user-based definition of quality |
| C. | a manufacturing- based definition of quality |
| D. | a product-based definition of quality |
| Answer» B. a user-based definition of quality | |
| 164. |
Deming's 4 step cycle for improvement is______________ |
| A. | plan, do, check, act |
| B. | schedule, do, act, check |
| C. | do, act, check, monitor |
| D. | plan, control, act, sustain |
| Answer» A. plan, do, check, act | |
| 165. |
In Six Sigma, a is defined as any process output that does not meet customer specifications |
| A. | error |
| B. | cost |
| C. | quality |
| D. | defect |
| Answer» D. defect | |
| 166. |
Quality practices must be carried out ______________ |
| A. | at the start of the project |
| B. | throuout the life of the project |
| C. | at the end of the project |
| D. | no neeed to carry out quality practices |
| Answer» B. throuout the life of the project | |
| 167. |
The Pareto Chart is a bar chart that allows for analysis of data in search of the Pareto Principle or the _______________________ |
| A. | 80/20 rule. |
| B. | pareto rule |
| C. | negotiation rule |
| D. | all of the above |
| Answer» A. 80/20 rule. | |
| 168. |
The pareto chart is a that allows us to focus on the issues that are causing the biggest problem, and thus maximize our impact. |
| A. | prioritization tool |
| B. | mu sigma |
| C. | ishikawa tool |
| D. | all of the above |
| Answer» A. prioritization tool | |
| 169. |
The Cause and Effect diagram is a visual tool to explore all the that may be causing or contributing to a particular problem |
| A. | potential factors |
| B. | similar factors |
| C. | unrealistic factors |
| D. | none of the above |
| Answer» A. potential factors | |
| 170. |
Data are onthe check sheet to record the frequency of specific events during a datacollection period. |
| A. | “collected and tabulated” |
| B. | "circulated" |
| C. | "reported" |
| D. | none of the above |
| Answer» A. “collected and tabulated” | |
| 171. |
Histogram is very useful tool to describe a of the frequencydistribution of observed values of a variable |
| A. | sense |
| B. | quality |
| C. | measurement |
| D. | all of the above |
| Answer» A. sense | |
| 172. |
The diagram is a problem-solving tool that investigates and analizessystematically all the potential or real causes that result in a single effect. |
| A. | cause and effect |
| B. | pareto |
| C. | histogram |
| D. | all of the above |
| Answer» A. cause and effect | |
| 173. |
Which of the following does not affect the software quality and organizational performance? |
| A. | market |
| B. | product |
| C. | technology |
| D. | people |
| Answer» A. market | |
| 174. |
Which of the following is an indirect measure of product? |
| A. | quality |
| B. | complexity |
| C. | reliability |
| D. | all of the above |
| Answer» D. all of the above | |
| 175. |
A graphical technique for finding if changes and variation in metrics data are meaningful is known as |
| A. | defect removal efficiency |
| B. | function point analaysis |
| C. | control chart |
| D. | all of the above |
| Answer» C. control chart | |
| 176. |
What encapsulates state data and services in a manner that is analogous to objects? |
| A. | state box |
| B. | clean box |
| C. | white box |
| D. | black box |
| Answer» A. state box | |
| 177. |
MTTF stands for _______________________ |
| A. | mean-time-to-f unction |
| B. | mean-time-to-fa ilure |
| C. | manufacture-ti me-to-function |
| D. | none of the above |
| Answer» B. mean-time-to-fa ilure | |
| 178. |
A is an existing defect that hasn’t yet ust because another defect has yet caused a failure because the exact set of conditions were never met. |
| A. | mutant defect |
| B. | bksu defect |
| C. | latent defect |
| D. | delayed defect |
| Answer» C. latent defect | |
| 179. |
Which of the following is not a state of a defect in defect life cycle: |
| A. | new |
| B. | open |
| C. | verified |
| D. | critical |
| Answer» D. critical | |
| 180. |
........... happens when defect introduced in one phase passes to another phase without getting caught in the phase-end verification or validation activities. |
| A. | defect cascading |
| B. | defect prevention |
| C. | qc |
| D. | defect leakage |
| Answer» D. defect leakage | |
| 181. |
Defect is a technique that was developed to estimate the number of defects resident in a piece of software. |
| A. | density |
| B. | seeding |
| C. | age |
| D. | latency |
| Answer» B. seeding | |
| 182. |
The main focus of is to reduce defects and variations in the processes. |
| A. | qa |
| B. | qc |
| C. | six sigma |
| D. | none of the above |
| Answer» C. six sigma | |
| 183. |
Who among the following suggested seven quality tools for controlling quality? |
| A. | juran |
| B. | kaoru ishikawa |
| C. | dr. w. edward deming |
| D. | feigenbaum |
| Answer» B. kaoru ishikawa | |
| 184. |
Which among the following depicts positive and negative relation between driving factor and performance factor? |
| A. | scatter diagram |
| B. | histogram |
| C. | check sheet |
| D. | none of the above |
| Answer» A. scatter diagram | |
| 185. |
Which of the following is the limitation of Quality circle? |
| A. | higher cost |
| B. | training time and cost |
| C. | development of leadership |
| D. | all of the above |
| Answer» B. training time and cost | |
| 186. |
Which of the following is the task ofproject indicators: |
| A. | help in assessment of status of ongoing project |
| B. | track potential risk |
| C. | help in assessment of status of ongoing project and track potential risk |
| D. | none of the above |
| Answer» C. help in assessment of status of ongoing project and track potential risk | |
| 187. |
The intent of project metrics is : |
| A. | minimization of development schedule |
| B. | for strategic purposes |
| C. | assessig project quality on going basis |
| D. | minimization of development schedule and assessing project quality on going basis |
| Answer» D. minimization of development schedule and assessing project quality on going basis | |
| 188. |
Inspections and testing are what kinds of Quality Costs? |
| A. | prevention |
| B. | internal failure |
| C. | external failure |
| D. | appraisal |
| Answer» D. appraisal | |
| 189. |
-----------is the ability to encourage by "push or pull" technical people to produce to their best ability. |
| A. | evaluating |
| B. | motivation |
| C. | monitoring |
| D. | none of the above |
| Answer» B. motivation | |
| 190. |
Which of the following is responsible for the quality objective? |
| A. | top level management |
| B. | middle level management |
| C. | frontline management |
| D. | all of the above |
| Answer» A. top level management | |
| 191. |
Select the operating system which is not supported by Selenium IDE |
| A. | unix |
| B. | linux |
| C. | windows |
| D. | solaries |
| Answer» A. unix | |
| 192. |
The Selenium RC is used |
| A. | to run your test against different browers on different opearting systems |
| B. | to create test with little or no prior knowledge in programming |
| C. | to test a web application against firefox only |
| D. | to run a huge test suite, that can be executed on multiple machines |
| Answer» A. to run your test against different browers on different opearting systems | |
| 193. |
Out of the following which can only test web applications |
| A. | qtp |
| B. | selenium |
| Answer» B. selenium | |
| 194. |
Select the component which is not part of Selenium Suite |
| A. | selenium ide |
| B. | selenium rc |
| C. | seleniumgrid |
| D. | selenium web |
| Answer» D. selenium web | |
| 195. |
Select the language which is not supported by the Selenium RC |
| A. | asp |
| B. | java |
| C. | c# |
| D. | php |
| Answer» A. asp | |
| 196. |
Select the name which is not the type of locators |
| A. | id |
| B. | name |
| C. | password |
| D. | link text |
| Answer» C. password | |
| 197. |
The Web Driver is used |
| A. | to execute tests on the html unit browser |
| B. | to design a test using selenese |
| C. | to quickly create tests |
| D. | to test a web application against firefox only |
| Answer» A. to execute tests on the html unit browser | |
| 198. |
The Selenium IDE is used |
| A. | to create customized test results |
| B. | to deploy your tests across multiple environments using selenium grid |
| C. | to test with html unit |
| D. | to test a web application against firefox only |
| Answer» D. to test a web application against firefox only | |
| 199. |
Select the browser which is supported by Selenium IDE |
| A. | google chrome |
| B. | opera mini |
| C. | mozilla firefox |
| D. | internet explorer |
| Answer» C. mozilla firefox | |
| 200. |
Selenium IDE stands for |
| A. | selenium initialization development environment |
| B. | selenium interrelated development environment |
| C. | selenium integrated development environment |
| D. | selenium information development environment |
| Answer» C. selenium integrated development environment | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.