The range of horse power of electric motor drives for rolling mills is of the order of

Related MCQs

• A 4 pole, 250V series motor has a wave connected armature with 1254 conductors. The flux per pole is 22mWb when the motor taking 50A. Iron and friction lossses amount to 1000W. Armature resistance 0.2Ω, series field resistance 0.2Ω. What is the output power in H.P.
• If the voltage equation of a dc motor is multiplied by ----- on both sides, we get power equation of dc motor
• A 440V, 20HP, 3phase motor operates at full load, 88% efficiency and 0.65 power factor lagging, the current drawn by motor is
• Motors preferred for rolling mill drive is
• If the back emf in a dc motor varnishes suddenly, then the motor:
• A thick wire is used in dc series motor field winding than that in dc shunt motor:
• A DC shunt motor is driving a constant torque load. On inserting an additional resistance in the armature circuit, the speed of the motor will:
• A flywheel is employed with a dc compound motor to reduce the peak demand, the compound motor should be:
• The shaft torque in a DC motor is less than total armature torque because of ____in the motor
• ____ motor is a variable speed motor.