There is no electrical connection between stator and rotor, still power is transffered from stator to rotor through

Related MCQs

• The relative speed between stator flux and rotor is equal to
• The air gap between the stator and rotor of a 3 phase induction motor ranges from
• The speed of rotating field due to rotor currents relative to stator core in an induction motor is
• A 3-phase , 50 Hz , 4-pole squirrel cage induction motor has its stator rewound for 6 poles without any alternations in the rotor. The motor would now run at a speed
• The input to a 3-ph induction motor is 50KW. The stator losses amount to 800W. The rotor cu loss per phase is (slip = 3%)
• The rotor standstill resistance and reactance of an induction motor are 0.5Ω and 2.5Ω hence the rotor impedance at 5% slip is____.
• A 3 phase indution motor is running with slip of 4% hving synchronous speed of 1500rpm. If rotor induced emf per phase in standstill condition is 115.47V and rotor impedance in standstill condition is 0.1+j1 Ω then torque developed ia____.
• A 25kW, 3 phase I.M. is running with 6% slip. Its rotor resistance per phase is____ if frictional losses are 850W and rotor current per phase is 65A.
• The speed of rotating field due to rotor currents relative to rotor surface in an induction motor is
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The external resistance required in the rotor per phase to get maximum torque at start is ___.