[Solved] Thermal conductivity of a material may be defined as the

Q.	Thermal conductivity of a material may be defined as the
A.	quantity of heat flowing in one second through one cm cube of material when opposite faces ^re maintained at a temperature difference of 1°C
B.	quantity of heat flowing in one second through a slab of the material of area one cm square, thickness 1 cm when its faces differ in temperature by 1°C
C.	heat conducted in unit time across unit area through unit thickness when a temperature difference of unity is maintained between opposite faces
D.	all of the above
E.	none of the above.
Answer» D. all of the above

1.9k

Do you find this helpful?

View all MCQs in

Heat Transfer (HT)

Discussion

No comments yet

Related MCQs

The variation of thermal conductivity of a metal with temperature is often correlated using an expression of the form K = K0 + at, where, K is the thermal conductivity and T is the temperature (in °K). The units of 'a' in SI system will be
For gases, the thermal conductivity increases with temperature rise. For liquids, with increase in concentration, its thermal conductivity generally
If thermal conductivity of aluminium is say 100 units at 0?C, the thermal conductivity at 500?C will be closer to
A wall has two layers A and B, each made of a different material. Both the layers have the same thickness. The thermal conductivity of material of A is twice that of B. Under the thermal equilibrium the temperature difference across the wall is 30?C. The temperature drops in layers A and B will be respectively
A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature difference across the wall is 36°C. The temperature difference across the layer A is __________ °C.
A composite flat wall of a furnace is made of two materials 'A' and 'B'. The thermal conductivity of 'A' is twice of that of material 'B', while the thickness of layer of 'A' is half that of B. If the temperature at the two sides of the wall are 400 and 1200°K, then the temperature drop (in °K) across the layer of material 'A' is
Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer coefficient is „3k/l’. If the wall temperature on the outside is held at 25°C, what is the inside wall temperature in degree centigrade?
If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law.
At steady state the temperature variation in a plane wall, made of two different solids I & II is shown below: The thermal conductivity of material „I‟
The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface)