The thermal diffusivities for gases are generally

Related MCQs

• The thermal diffusivities for solids are generally
• For gases, the thermal conductivity increases with temperature rise. For liquids, with increase in concentration, its thermal conductivity generally
• At constant temperature, the thermal conductivities of gases __________ with rise in pressure.
• The thermal efficiency of a reversible heat engine operating between two given thermal reservoirs is 0.4. The device is used either as a refrigerator or as a heat pump between the same reservoirs. Then the coefficient of performance as a refrigerator (COP)R and the co-efficient of performance as a heat pump (COP)HP are
• The variation of thermal conductivity of a metal with temperature is often correlated using an expression of the form K = K0 + at, where, K is the thermal conductivity and T is the temperature (in °K). The units of 'a' in SI system will be
• If thermal conductivity of aluminium is say 100 units at 0?C, the thermal conductivity at 500?C will be closer to
• A wall has two layers A and B, each made of a different material. Both the layers have the same thickness. The thermal conductivity of material of A is twice that of B. Under the thermal equilibrium the temperature difference across the wall is 30?C. The temperature drops in layers A and B will be respectively
• Heat transfer in liquid and gases takes place by
• In convection heat transfer from hot flue gases to water tube, even though flow may be turbulent, a laminar flow region (boundary layer of film) exists close to the tube. The heat transfer through this film takes place by
• Prandtl number for most of dry gases is about