In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator.

Related MCQs

• Steam consumption in kg/hr in case of an evaporator is given by (where, C & E are capacity the economy of the evaporator respectively).
• A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because
• What is the steam economy in case of a single effect evaporator system?
• A multiple effect evaporator as compared to a single effect evaporator of the same capacity has
• For the same heat transfer area and the terminal conditions, the ratio of the capacities of a single effect evaporator to a triple effect evaporator is
• Steam economy in case of a triple effect evaporator will be
• A 10 cm dia steam pipe, carrying steam at 180°C, is covered with an insulation (conductivity = 0.6 W/m.°C). It losses heat to the surroundings at 30°C. Assume a heat transfer co-efficient of 0.8 W/m2 .°C for heat transfer from surface to the surroundings. Neglect wall resistance of the pipe and film resistance of steam. If the insulation thickness is 2 cms, the rate of heat loss from this insulated pipe will be
• Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam.
• In a single effect evaporator, the economy is
• Vacuum is generally maintained in the vapour space of an evaporator mainly to