Multi cylinder engines are usually placed at an equal inclination to each other.

Related MCQs

• Multi-cylinder engines are desirable because
• 45 N/mm2. The connecting rod length between centres is 1.2 m and the cylinder bore is 0.5 m. If the engine runs at 250 r.p.m. and if the effect of piston rod diameter is neglected, calculate the net load on piston.
• For a 4 cylinder engine, when the pressure inside the cylinders exceeds the atmospheric pressure then.
• 2 D ALEMBERT'S PRINCIPLE - DYNAMIC ANALYSIS IN RECIPROCATING ENGINES
• The cam follower generally used in automobile engines is
• The cam follower extensively used in air- craft engines is
• For low and moderate speed engines, the cam follower should move with
• For high speed engines, the cam follower should move with
• Which type of temperature sensor is placed in Integrated Circuits?
• To detect that in which column, the key is placed?