If the total efficiency is 0.35 in arc welding. Then what is the welding speed in mm/sec if the cross-sectional area is 5mm2, welding power is 2 kW and the heat required in melting the metal is 100 J/mm3.

Related MCQs

• What is the differentiating factor between flux core arc welding and gas-shielded metal arc welding processes?
• If the heat transfer efficiency is 0.5 and the melting efficiency is 0.6, then the overall efficiency will be?
• Consider a situation in which a welding operation is being performed with V = 20 volts, I = 200 A, and the cross-sectional area of the weld bead is 30 mm2. Estimate the welding speed if the workpiece and electrode are made of (a) aluminum, (b) carbon steel, and (c) titanium. Use an efficiency of 75%.
• In arc welding, arc is created between the electrode and work by?
• If the open circuit voltage is 60 volt and the short circuit current is 20 amperes. Then determine the voltage required for welding if the current required during welding is 10 amperes?
• volts, I = 200 A, and the cross-sectional area of the weld bead is 30 mm2. Estimate the welding speed if the workpiece and electrode are made of (a) aluminum, (b) carbon steel, and (c) titanium. Use an efficiency of 75%.
• What is the only difference between Plasma arc welding and TIG welding?
• Why are flux added to the charge ( parent metal to be melted) during melting of a metal?
• Which of the following is true about shielded metal arc welding?
• Which of the following metal has a melting point of about 1537oC and latent heat of fusion 65.0 cal/g?