Consider a situation in which a welding operation is being performed with V = 20 volts, I = 200 A, and the cross-sectional area of the weld bead is 30 mm2. Estimate the welding speed if the workpiece and electrode are made of (a) aluminum, (b) carbon steel, and (c) titanium. Use an efficiency of 75%.

Related MCQs

• volts, I = 200 A, and the cross-sectional area of the weld bead is 30 mm2. Estimate the welding speed if the workpiece and electrode are made of (a) aluminum, (b) carbon steel, and (c) titanium. Use an efficiency of 75%.
• If the total efficiency is 0.35 in arc welding. Then what is the welding speed in mm/sec if the cross-sectional area is 5mm2, welding power is 2 kW and the heat required in melting the metal is 100 J/mm3.
• If the total efficiency is 0.35 in arc welding. Then what is the welding speed in mm/sec if the cross-sectional area is 5mm2, welding power is 2 kW and the heat required in melting the metal is 100 J/mm3.
• Weld strength in inertia friction welding is more than direct drive friction welding.
• In inertia friction welding, one workpiece is connected to            
• In which of the following gas welding process a non-consumable electrode is used?
• In arc welding, arc is created between the electrode and work by?
• Friction welding produces quality joints, with a 100% weld.
• In direct drive friction welding, lower weld forces are generated.
• Friction welding produces quality joints, with a 100%            weld.