If the sender is a host and wants to send a packet to another host on another network, the logical address that must be mapped to a physical address is ______.

Related MCQs

• If the sender is a host and wants to send a packet to another host on the same network, the logical address that must be mapped to a physical address is ______.
• The sender is a router that has received a datagram destined for a host on another network. The logical address that must be mapped to a physical address is ______.
• The sender is a router that has received a datagram destined for a host on the same network. The logical address that must be mapped to a physical address is ______.
• When a primary device wants to send data to a secondary device, it needs to first send _______ frame.
• In Go-Back-N ARQ, if frames 4, 5, and 6 are received successfully, the receiver may send an ACK _______ to the sender.
• _______ control refers to a set of procedures used to restrict the amount of data that the sender can send before waiting for acknowledgment.
• Which one of the following allows a user at one site to establish a connection to another site and then pass keystrokes from local host to remote host?
• _________ means that a sender must not be able to deny sending a message that he sent.
• The local host and the remote host are defined using IP addresses. To define the processes, we need second identifiers called ____________.
• Ethernet uses a ______ physical address that is imprinted on the network interface card (NIC).