The amount of reinforcement for main bars in a slab, is based upon

Related MCQs

• If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is
• If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is
• The pitch of the main bars in a simply supported slab, should not exceed its effective depth by
• Lapped splices in tensile reinforcement are generally not used for bars of size larger than
• Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam
• In a simply supported slab, alternate bars are curtailed at
• Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than
• The breadth of a ribbed slab containing two bars must be between
• Distribution reinforcement in a simply supported slab, is provided to distribute
• In case the factor of safety against sliding is less than 1.5, a portion of slab is constructed downwards at the end of the heel slab, which is known as