In distillation where q is defined as the moles of liquid flow in the stripping section per mole of feed introduced, for saturated liquid feed

Related MCQs

• Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the solvent flow, rate is 400 moles of S/m2 . hr. The equilibrium data is represented by Y = 3X2 , where Y is in moles of a A/moles of B and X is in moles A/moles of S. The maximum percentage extraction achieved in the unit is
• On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in
• If f = moles of vapour present per mole of feed, then the slope of feed line is (McCabeThiele method)
• When the feed to a distillation column is a saturated liquid, slope of the feed line is
• The reflux to a distillation column is 100 moles/hr, when the overhead product rate is 50 moles/hr. The reflux ratio is
• Experiments were conducted to determine the flux of a species A in a stagnant medium across a gas-liquid interface. The overall mass transfer co-efficient based on the liquid side for dilute systems for the above was estimated to be 4 × 10-3 kg mole/m2 .s. The equilibrium data for the system is given as y = 2x. The flux across the interface (in kg mole/m2 .s) for bulk concentrations of A in gas phase and liquid phase as y = 0.4 and x = 0.01 respectively is:
• The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will
• In a binary distillation column, if the feed contains 40 mole % vapour, the q line will have a slope of
• In stripping section of continuous distillation column, the
• One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect