Which of the following is not a unit of mass transfer co-efficient?

Related MCQs

• H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S has to be reduced from 0.05 to 0.001 mole fraction in the gas side. The height of the tower (in metres) corresponding to an operating line given by, y = 5x + 0.001 is
• For the gas absorption, the height of a transfer unit, based on the gas phase is given by (G: superficial molar gas velocity, L: superficial molar liquid velocity, FG: mass transfer co-efficient, moles/m2, a: interfacial area per unit volume of tower)
• For experimental determination of mass transfer co-efficient by wetted wall tower, the mass transfer area is
• JD factor for mass transfer is a function of Reynolds number. Mass transfer by molecular diffusion from a single drop to surrounding still air is given by
• A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls /ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids))
• Penetration theory states that the mass transfer co-coefficient is equal to (where, De is diffusivity and 't' is time)
• Mass transfer co-efficient 'K' according to penetration theory varies with mass diffusivity as
• Corresponding to Nusselt number in heat transfer, the dimensionless group in mass transfer is the __________ number.
• In an interphase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be
• Corresponding to Prandtl number in heat transfer, the dimensionless group in mass transfer is the __________ number.