The property of material by virtue of which a body returns to its original shape after removal of load is known as

Related MCQs

• The property of material by virtue of which a material can be beaten into plates is called
• When a material is loaded within elastic limit, the material will regain its shape and size when the load is removed.
• There is always a limiting value of load up to which the strain totally disappears on the removal of load; the stress corresponding to this load is called…………
• A spring, when loaded, is permanently distorted and recover its original shape when the load is removed.
• The failure of a material under varying load, after a number of cycles of such load, is known as
• A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
• If percentage elongation of a certain specimen made of a material 'A' under tensile test is 30% and the percentage elongation of a specimen with same dimensions made of another material 'B' is 40%, then material 'B' is more ductile than material 'A'.
• A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
• A three hinged arch is carrying uniformly distributed load over the entire span. The arch is free from shear force and bending moment if its shape is
• A uniformly distributed load may be assumed to behave like a point load at the centre of gravity of the load for all sorts of calculations.