If the section modulus of a beam is increased, the bending stress in the beam will

Related MCQs

• Two materials are having modulus of elasticity, modulus of rigidities and bulk modulus as (E1, E2), (C1, C2), and (K1, K2). The modulus ratio is given by
• The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
• In a beam of uniform strength, the bending stress developed is constant and is equal to the allowable stress at every section of the beam.
• A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• The modulus of elasticity in terms of bulk modulus and modulus of rigidity is given by
• A material has modulus of rigidity equal to 0.4x105 N/mm2 and Bulk modulus equal to 0.95 x105 N/mm2 The Young’s modulus value in GPa is..
• A tensile material is having Young’s modulus 2.1 x105 N/mm2 and modulus of Rigidity is 0.82 x105 N/mm2. The value of Bulk Modulus is ..
• If, for a given material, the modulus of elasticity is equal to twice its modulus of rigidity (G), then the bulk modulus is
• The bending moment diagram for a cantilever beam subjected to bending moment at the end of the beam would be