For a supersonic flow, velocity

Related MCQs

• In case of turbulent flow of a fluid through a circular tube (as compared to the case of laminar flow at the same flow rate) the maximum velocity is ....., shear stress at the wall is ....., and the pressure drop across a given length is ....., the correct words for the blanks are, respectively
• In turbulent flow the velocity distribution is a function of the distance y measured from the boundary surface and shear friction velocity uf, and follows a
• For a flow between two stationary parallel plates the velocity distribution is parabolic. In this case the mean velocity is equal to
• The distance from pipe boundary, at which the point velocity is equal to average velocity in case of turbulent flow (when R is the radius of the pipe), is
• The ratio of average velocity to mzximum velocity for steady laminar flow in circular pipes is
• Model analysis of aeroplanes and projectiles moving at supersonic speed are based on
• ...... is important in compressible fluid flow problems at high velocities, such as high velocity flow in pipes or motion of high-speed projectiles and missiles.
• If one of the walls moves in the direction of flow with uniform velocity while the other wall is stationary, then the resulting flow between parallel walls is called
• Under which two of the following regimes would the assumption of a continuum be reasonable (1) Free molecule flow (2) Gas dynamics (3) Slip flow (4) Complete vacuum (5) Liquid flow
• The velocity in a 2 cm-diameter pipe is 20 m/s. If the pipe enlarges to 5 cm diameter velocity, in m/s, will be