Sometimes refrigeration plants use cooling towers. The water cooled in those towers is supplied

Related MCQs

• In vapour absorption refrigeration system heating in generator is done at 100°C, refrigeration in evaporator at 10°C and cooling by cooling water in condenser at 30°C. The (COP)max is
• Cooling towers are used for cooling water
• Sub-cooling is a process of cooling the refrigerant in vapour compression refrigeration system
• 2 HP per ton of refrigeration is required to maintain the temperature of - 40?C in the refrigerator if the refrigeration cycle works on Carnot cycle. The COP of the cycle would be
• The dense air refrigeration system as compared to open air refrigeration system for same range of temperatures using Bell- Colemann cycle requires.
• For simple saturated vapour compression refrigeration cycle operating between 5°C and 40°C, and the refrigerants being R-11, R-12, R-717 and R-22, the compressor displacement per min per ton of refrigeration is highest for
• Co-efficient of performance of vapour absorption refrigeration system as compared to that for vapour compression refrigeration system is
• Work of compression of the fluid in vapour absorption refrigeration system as compared to that for vapour compression refrigeration system is
• In cooling towers the heat is dissipated mainly by
• The drift loss in cooling towers is around