[Solved] Deflection the point of application of an external force acting on a beam is equal to the partial derivation of the work of deformation with respect to this force

Q.	Deflection the point of application of an external force acting on a beam is equal to the partial derivation of the work of deformation with respect to this force
A.	Rankine's theorem
B.	Mohr's hypothesis
C.	Castigliano's theorem
D.	Maxwell's theorem
E.	None of the above
Answer» C. Castigliano's theorem

851

Do you find this helpful?

View all MCQs in

Strength of Materials

Discussion

No comments yet

Related MCQs

Whenever some external system of forces acts on a body, it undergoes some deformation. As the body undergoes some deformation, it sets up some resistance to the deformation. This resistance per unit area to deformation, is called
A simply supported beam 'A' of length l, breadth b and depth d carries a central load W. Another beam 'B' of the same dimensions carries a central load equal to 2 W. The deflection of beam 'B' will be
If the deflection at the free end of a uniformly loaded cantilever beam is 15mm and the slope of the deflection curve at the free end is 0.02 radian, then the length of the beam is
A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be
A simply supported beam 'A' of length l, breadth b and depth d carried a central point load W. Another bream 'B' has the same length and breadth but its depth is doubled. The deflection of beam 'B' will be double as compared to beam 'A'.
A beam of overall length / rests on two simple supports with equal overhangs on both sides. Two equal loads act at the free ends. If the deflection at the centre of the beam is the same as at either end, then the length of either overhang is
When a no. of loads rest upon a beam, the deflection at any point is equal to the sum of the deflections at this point due to each of the loads taken separately. This is according to
A simply supported beam with rectangular cross-section is subjected to a central concentrated load. If the width and depth of the beam are doubled, then the deflection at the centre of the beam will be reduced to