We cannot use h-parameter model in high frequency analysis because                          

Related MCQs

• Gain bandwidth frequency is GBP= 3000 Mhz. The cut-off frequency is f=10Mhz. What is the CE short circuit current gain at the β cutoff frequency?
• Find the 3-dB frequency given that the gain of RC coupled amplifier is 150, the low frequency voltage gain is 100 and the input frequency is 50Hz.
• Consider a voltage amplifier having a frequency response of the low-pass STC type with a dc gain of 60 dB and a 3-dB frequency of 1000 Hz. Then the gain db at
• Consider an RC coupled amplifier at low frequency. Internal voltage gain is -120. Find the voltage gain magnitude, when given that collector resistance = 1kΩ, load = 9kΩ, collector capacitance is 0. is 0.1μF, and input frequency is 20Hz.
• If the input frequency of a half wave rectifier is 100Hz, then the ripple frequency will be                   
• If the load resistance of a C.E. stage increases by a factor of 2, what happens to the high frequency response?
• During high frequency applications of a B.J.T., which of the following three stages do not get affected by Miller’s approximation?
• During high frequency applications of a B.J.T., which parasitic capacitors arise between the base and the emitter?
• During high frequency applications of a B.J.T., which parasitic capacitors arise between the collector and the emitter?
• During high frequency applications of a B.J.T, which parasitic capacitors arise between the collector and the base?