A circle drawn with centre as the cam centre and radius equal to the distance between the cam centre and the point on the pitch curve at which the pressure angle is maximum, is called

Related MCQs

• The angle between the direction of the follower motion and a normal to the pitch curve is called
• 6 m. It rotates at 1800 r.p.m. clockwise, when looking from the stern. Determine the gyroscopic couple, if the ship travels at 100 km/hr and steer to the left in a curve of 75 m radius.
• The flywheel of an engine has a mass of 200 kg and radius of gyration equal to 1 m. The average torque on the flywheel is 1200 Nm. Find the angular acceleration of flywheel and the angular speed after 10 seconds starting from rest.
• 5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
• 5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in kN?
• If the crank and the connecting rod are 300 mm and 1 m long respectively and the crank rotates at a constant speed of 250 r.p.m., determine the crank angle at which the maximum velocity occurs is          
• The relation between stroke punch s and radius of crank r is              
• Which of the following displacement diagrams should be chosen for better dynamic performance of a cam-follower mechanism ?
• If a force has a line of action at a distance h from the centre of gravity, then the value of h is given by            
• For low and moderate speed engines, the cam follower should move with