McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Mechanical Engineering .
| 1. |
An eutectoid steel consists of |
| A. | wholly pearlite |
| B. | wholly austenite |
| C. | pearlite and ferrite |
| D. | pearlite and cementite |
| Answer» A. wholly pearlite | |
| 2. |
In normalizing, one of the following is not correct |
| A. | it relieves internal stresses |
| B. | it produces a uniform structure |
| C. | the rate of cooling is rapid |
| D. | the rate of cooling is slow |
| Answer» D. the rate of cooling is slow | |
| 3. |
Fine grain sizes are obtained by |
| A. | slow cooling |
| B. | increasing nucleation rate |
| C. | decreasing growth rate |
| D. | fast cooling |
| Answer» A. slow cooling | |
| 4. |
Which one of the following is not the purpose of full annealing |
| A. | refines grains |
| B. | induces softness |
| C. | removes strains and stresses |
| D. | produces hardest material |
| Answer» D. produces hardest material | |
| 5. |
Annealing is generally done to impart |
| A. | hardness to the material |
| B. | softness to the material |
| C. | brittleness to the material |
| D. | high conductivity to the material |
| Answer» B. softness to the material | |
| 6. |
Which of the following processes is used to harden a steel? |
| A. | normalizing |
| B. | annealing |
| C. | carburizing |
| D. | quenching |
| Answer» D. quenching | |
| 7. |
The hardness of quenched Martensite |
| A. | increases with increasing carbon percentage |
| B. | decreases as carbon percentage increases |
| C. | first increases and then remains almost constant as the carbon percentage increases |
| D. | first increases and then decreases as carbon percentage increases. |
| Answer» C. first increases and then remains almost constant as the carbon percentage increases | |
| 8. |
Match the phases of steel in Group I with the crystal structures in Group II P. Martensite 1. bcc Q. Cementite 2. fcc R. Austenite 3. bct S. Ferrite 4. Orthorhombic |
| A. | p-3, q-4, r-1, s-2 |
| B. | p-2, q-3, r-1, s-4 |
| C. | p-3, q-4, r-2, s-1 |
| D. | p-4, q-3, r-2, s-1 |
| Answer» C. p-3, q-4, r-2, s-1 | |
| 9. |
Dispersion hardening materials can be produced with the help of followinf process |
| A. | forging |
| B. | rolling |
| C. | powder metallurgy |
| D. | none of the above |
| Answer» C. powder metallurgy | |
| 10. |
in case of carbonitriding by diffusion of which elements the surface become harder of the metal |
| A. | only carbon |
| B. | carbon and nitrogen |
| C. | only nitrogen |
| D. | none of the above |
| Answer» B. carbon and nitrogen | |
| 11. |
in case of flame hardening the heat source in the form of |
| A. | lpg gas flame |
| B. | furnace oil flame |
| C. | oxy-acetelene flame |
| D. | none of the above |
| Answer» C. oxy-acetelene flame | |
| 12. |
in jominy end quench test sample is quenched by |
| A. | water |
| B. | oil |
| C. | brine water |
| D. | all of the above |
| Answer» A. water | |
| 13. |
martempering is also known as |
| A. | marheating |
| B. | marcooling |
| C. | marquenching |
| D. | none of the above |
| Answer» C. marquenching | |
| 14. |
In martempering heat treatment, the final phase which obtain |
| A. | ferrite |
| B. | austenite |
| C. | pearlite |
| D. | none of the above |
| Answer» D. none of the above | |
| 15. |
In petenting process, which is the final phase obtainafter completion of heat treatment |
| A. | pearlite |
| B. | bainite |
| C. | martensite |
| D. | austenite |
| Answer» A. pearlite | |
| 16. |
which of the following metal alloy is suitable for the precipitation hardenable alloy. |
| A. | al-zn |
| B. | al-ni |
| C. | al-cr |
| D. | al-cu |
| Answer» D. al-cu | |
| 17. |
Pearlite is harder than ferrite,this statement is------- |
| A. | true |
| B. | false |
| C. | not applicable |
| D. | none of the above |
| Answer» A. true | |
| 18. |
Cementite is harder than pearlite,this statement id ------- |
| A. | false |
| B. | true |
| C. | not applicable |
| D. | none of the above |
| Answer» B. true | |
| 19. |
The Atomic structure of austenite phase is |
| A. | b.c.c |
| B. | b.c.t |
| C. | h.c.p |
| D. | f.c.c |
| Answer» D. f.c.c | |
| 20. |
The Atomic structure of martensite is |
| A. | b.c.c |
| B. | b.c.t |
| C. | h.c.p |
| D. | f.c.c |
| Answer» B. b.c.t | |
| 21. |
In case of annealing heat treatment process hypoeutectoid steels are heated above --------- temperature |
| A. | ac1 |
| B. | ac3 |
| C. | acm |
| D. | none of the above |
| Answer» B. ac3 | |
| 22. |
In case of Normalizing heat treatment process hypoeutectoid steels are heated above --------- temperature |
| A. | ac1 |
| B. | ac3 |
| C. | acm |
| D. | none of the above |
| Answer» B. ac3 | |
| 23. |
In case of hardening heat treatment process hypoeutectoid steels are heated above --------- temperature |
| A. | ac1 |
| B. | ac3 |
| C. | acm |
| D. | none of the above |
| Answer» B. ac3 | |
| 24. |
In case of Annealing heat treatment process hypereutectoid steels are heated above --------- temperature |
| A. | ac1 |
| B. | ac3 |
| C. | acm |
| D. | none of the above |
| Answer» B. ac3 | |
| 25. |
In case of hardening heat treatment process hypereutectoid steels are heated above --------- temperature |
| A. | ac1 |
| B. | ac3 |
| C. | acm |
| D. | none of the above |
| Answer» B. ac3 | |
| 26. |
In case of normalising heat treatment process hypereutectoid steels are heated above --------- temperature |
| A. | ac1 |
| B. | ac3 |
| C. | acm |
| D. | none of the above |
| Answer» C. acm | |
| 27. |
One of the following is a transformation product of austenite. |
| A. | austenite to ferrite |
| B. | austenite to ledeburite |
| C. | austenite to pearlite |
| D. | none of the above |
| Answer» C. austenite to pearlite | |
| 28. |
One of the following is a transformation product of austenite. |
| A. | austenite to ferrite |
| B. | austenite to ledeburite |
| C. | austenite to martensite |
| D. | none of the above |
| Answer» C. austenite to martensite | |
| 29. |
One of the following is a transformation product of austenite. |
| A. | austenite to ferrite |
| B. | austenite to ledeburite |
| C. | austenite to carbide |
| D. | none of the above |
| Answer» C. austenite to carbide | |
| 30. |
The Chemical formula for cementite is |
| A. | fe3c |
| B. | fec3 |
| C. | fe2c3 |
| D. | none of the above |
| Answer» A. fe3c | |
| 31. |
Following is one of the heat treatment process. |
| A. | melting |
| B. | solidification |
| C. | hardening |
| D. | none of the above |
| Answer» C. hardening | |
| 32. |
One of the following is a heat treatment process for metals |
| A. | annealing |
| B. | normalising |
| C. | hardening |
| D. | all of the above |
| Answer» D. all of the above | |
| 33. |
From the following process,one is not a heat treatment process |
| A. | annealing |
| B. | normalising |
| C. | hardening |
| D. | machining |
| Answer» D. machining | |
| 34. |
One of the following is a transformation product of austenite. |
| A. | austenite to pearlite |
| B. | austenite to bainite |
| C. | austenite to martensite |
| D. | all of the above |
| Answer» D. all of the above | |
| 35. |
Pearlite is madeup of alternate colonies or lamilies of ---------and ------- |
| A. | ferrite and martensite |
| B. | ferrite and pearlite |
| C. | ferrite and cementite |
| D. | none of the above |
| Answer» C. ferrite and cementite | |
| 36. |
transformation of austenite to bainite starts from nucleation of-------at austenitic grain boundary |
| A. | ferrite |
| B. | cementite |
| C. | pearlite |
| D. | none of the above |
| Answer» A. ferrite | |
| 37. |
Bainite phase is divided into two types-------and-------- |
| A. | upper bainite and lower bainite |
| B. | large bainite and small bainite |
| C. | fast bainite and slow bainite |
| D. | none of the above |
| Answer» A. upper bainite and lower bainite | |
| 38. |
Martensite phase is obtain by |
| A. | fast cooling or quenching |
| B. | slow cooling |
| C. | no cooling |
| D. | none of the above |
| Answer» A. fast cooling or quenching | |
| 39. |
The isothermal transformation diagram i.e. TTT diagrams are -------- |
| A. | total transformation time |
| B. | total temperature transformation |
| C. | time temperature transformation |
| D. | none of the above |
| Answer» C. time temperature transformation | |
| 40. |
In the heat treatment cycle CCT means------- |
| A. | coolest cooling rate |
| B. | compared cooling rate |
| C. | critical cooling rate |
| D. | none of the above |
| Answer» C. critical cooling rate | |
| 41. |
Heat treatment can be defined as |
| A. | heating the metal in a solid state and then cooling it in a different manner |
| B. | heating the metal to melting point nad then cool to room temperature |
| C. | both a and b |
| D. | none of the above |
| Answer» A. heating the metal in a solid state and then cooling it in a different manner | |
| 42. |
One of the main purpose of heat treatment |
| A. | to improve ductility and strength |
| B. | to relieve internal stresses |
| C. | to improve machinability |
| D. | all of the above |
| Answer» D. all of the above | |
| 43. |
one of the following is heat treatment process for metal |
| A. | casting |
| B. | forging |
| C. | rolling |
| D. | none of the above |
| Answer» D. none of the above | |
| 44. |
one of the following is a purpose of anneling |
| A. | to soften the metal |
| B. | to relieve internal stresses |
| C. | to improve machinability |
| D. | all of the above |
| Answer» D. all of the above | |
| 45. |
In anneling process the metal from high temp is cooled very slowly in the furnace. This statement is ----- |
| A. | true |
| B. | false |
| Answer» A. true | |
| 46. |
one of the following cooling rate used for normalizing process |
| A. | furnace cooling |
| B. | water coolong |
| C. | air cooling |
| D. | none of the above |
| Answer» C. air cooling | |
| 47. |
Which heat treatment process is carried out after hardening process |
| A. | annealing |
| B. | normalising |
| C. | tempering |
| D. | none of the above |
| Answer» C. tempering | |
| 48. |
one of the following is main purpose of Normalizing |
| A. | to improve machinability |
| B. | to modify and refine grain |
| C. | to homogenize the microstructure |
| D. | all of the above |
| Answer» D. all of the above | |
| 49. |
CCR is a minimum cooling rate of steel, by which we get 100% ------phase |
| A. | bainite |
| B. | pearlite |
| C. | austenite |
| D. | martensite |
| Answer» D. martensite | |
| 50. |
One of the following is type of tempering heat treatment |
| A. | low temperature tempering |
| B. | high temperature tempering |
| C. | medium temperature tempering |
| D. | all of the above |
| Answer» D. all of the above | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.