The axis of precession is                          to the plane in which the axis of spin is going to rotate.

Related MCQs

• A disc is a spinning with an angular velocity ω rad/s about the axis of spin. The couple applied to the disc causing precession will be
• In latitude 25.0 S, SA (spin axis) of a FG (free gyro) is in position S40E and horizontal. Find the tilt after 6 hours.
• Balancing of single rotating mass by balancing masses in same plane and in different planes cannot take place.
• Centre of masses of the system lies on the axis of rotation.
• 24 m, length of stroke = 0.6 m, length of connecting rod = 1.5 m, mass of reciprocating parts = 300 kg, mass of connecting rod = 250 kg; speed of rotation = 125 r.p.m; centre of gravity of connecting rod from crank pin = 0.5 m ; Kg of the connecting rod about an axis through the centre of gravity = 0.65 m
• 24 m, length of stroke = 0.6 m, length of connecting rod = 1.5 m, mass of reciprocating parts = 300 kg, mass of connecting rod = 250 kg; speed of rotation = 125 r.p.m ; centre of gravity of connecting rod from crank pin = 0.5 m ; Kg of the connecting rod about an axis through the centre of gravity = 0.65 m
• 24 m, length of stroke = 0.6 m, length of connecting rod = 1.5 m, mass of reciprocating parts = 300 kg, mass of connecting rod = 250 kg; speed of rotation = 125 r.p.m; centre of gravity of connecting rod from crank pin = 0.5 m ; Kg of the connecting rod about an axis through the centre of gravity = 0.65 m
• 24 m, length of stroke = 0.6 m, length of connecting rod = 1.5 m, mass of reciprocating parts = 300 kg, mass of connecting rod = 250 kg; speed of rotation = 125 r.p.m ; centre of gravity of connecting rod from crank pin = 0.5 m ; Kg of the connecting rod about an axis through the centre of gravity = 0.65 m
• 665×10-3m, calculate the critical speed of the shaft in rps. Centre of disc at 0.25m away from centre of axis of shaft.
• Which of the following is incorrect regarding inertia force?