5 and the mean speed is 20 rpm, find the minimum speed.

Related MCQs

• 5 and the mean speed is 20 rpm, find the maximum speed.
• For a 4 cylinder engine, if the minimum speed of the engine is half the maximum speed, then coefficient of fluctuation is
• Power is transmitted by an electric motor to a machine by using a belt drive. The tensions on the tight and slack side of the belt are 2200 N and 1000 N respectively and diameter of the pulley is 600 mm. If speed of the motor is 1500 r.p.m, find the power transmitted.
• The flywheel of an engine has a mass of 200 kg and radius of gyration equal to 1 m. The average torque on the flywheel is 1200 Nm. Find the angular acceleration of flywheel and the angular speed after 10 seconds starting from rest.
• 3m, l=1m, find l2 = 0.5m, find r1 in m.
• For the given data of an Internal combustion engine : Mass of parts = 180 kg bore = 175 mm, length of stroke = 200 mm, engine speed = 500 r.p.m., length of connecting rod = 400 mm and crank angle = 60° from T.D.C, find the inertia force.
• In under damped vibrating system, if x1 and x2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to
• If the crank and the connecting rod are 300 mm and 1 m long respectively and the crank rotates at a constant speed of 250 r.p.m., determine the crank angle at which the maximum velocity occurs is          
• 2 m and the cylinder bore is 0.5 m. engine runs at 250 r.p.m & 30° from T.D.C. Find the piston effort.
• In latitude 25.0 S, SA (spin axis) of a FG (free gyro) is in position S40E and horizontal. Find the tilt after 6 hours.