[Solved] Noise is added to a signal

McqMate

Q.	Noise is added to a signal
A.	in the channel
B.	at receiving antenna
C.	at transmitting antenna
D.	during regeneration of information
Answer» A. in the channel
Explanation: noise is an unwanted signal that gets mixed with the transmitted signal while passing through the channel. the noise interferes with the signal and provides distortion in received signal. the transmitting antenna transmits modulated message signal while the receiving antenna receives the transmitted signal. regeneration of information refers to demodulating the received signal to produce the original message signal.

1.3k

0

Do you find this helpful?

6

View all MCQs in

Communication Engineering

Discussion

No comments yet

Related MCQs

If the peak message signal amplitude is half the peak amplitude of the carrier signal, the signal is modulated.
Which of the following is the ratio of signal energy per bit to noise power spectral density?
In angle modulation, signal to noise ratio before detection is a function of
Frequency modulated signal is regarded as the phase modulated signal in which the modulating wave is differentiated before modulation.
Sum of a periodic and aperiodic signal always be an aperiodic signal.
When noise is passed through a narrow band filter, the output of filter should be?
A narrow band noise can exist in
Quantization noise occurs in
Quantization noise depends upon both sampling rate and number of quantization levels.
In digital communication system, in order to increase noise immunity, it is necessary to increase