Consider a 250mmx15mmx10mm steel bar which is free to expand is heated from 150C to 400C. what will be developed?

Related MCQs

• steel bar 10 mm x 10 mm cross section is subjected to an axial tensile load of 20kN. If the length of bar is 1 m and E = 200 GPa, then elongation of the bar is:
• An axial pull of 50 KN is suddenly applied to a steel bar 2 m long and 1000 mm2 in cross-section. If modulus of elasticity is 200 GPa, find strain energy stored in the bar
• 3.5 m long bar is under tensile load and due to that increase in length of bar is 1.75 mm then strain =
• A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is
• The increase in the length of a bar of length 1 m, area 300 mm2, modulus of elasticity 2×10^5 N/mm2 due to a tensile load of 120 KN is .
• Elongation of a bar of uniform cross section of length „L‟, due to its own weight „W‟ is given by
• A bar 2 m long and 20 mm diameter is subjected to an axial pull of 125.6 KN. Due to this load, length increases by 4 mm and diameter reduce by 0.012 mm. Find Poison‟s ratio.
• The safe stress for a hollow steel column which carries an axial load of 2100 kN is 125 MN/m2. if the external diameter of the column is 30cm, what will be the internal diameter?
• A 10 m long mild steel rail section is fixed at 300 K temperature. If temperature increases by 60 K, find stress in rail section if ends are not yielded. Coefficient of thermal expansion is 12×10-6/K.
• The ultimate shear stress of a mild steel plate of 10 mm thickness is 350 N/mm2. Calculate the diameter of the hole that can be punched to it without exceeding a compressive stress of 700 N/mm2.