195
73.7k

430+ Concrete Technology Solved MCQs

These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Civil Engineering .

201.

If the aggregate completely passes through a 50 mm sieve and retained on 40 mm sieve, then the particular aggregate is said to be flaky if its least dimension is less than

A. 27 mm
B. 37 mm
C. 47 mm
D. 57 mm
Answer» A. 27 mm
202.

Which of the following statement is correct?

A. The maximum size of coarse aggregate should not exceed one-fourth of the minimum dimension of the plain concrete member.
B. the maximum size of coarse aggregate should not exceed one-fifth of the minimum dimension of the reinforced concrete member
C. The aggregates of 40 mm, 20 mm and 10 mm sizes are commonly used for concrete works.
D. all of the above
Answer» D. all of the above
203.

For highly loaded columns, the concrete mix used is of proportion

A. 1 ; 1 : 2
B. 1 ; 1.5 : 3
C. 1 ; 2 : 4
D. 1 ; 3 : 6
Answer» A. 1 ; 1 : 2
204.

The importance of batching is to obtain

A. strength
B. workability
C. durability
D. all of these
Answer» D. all of these
205.

Harshness in concrete is due to the excess of

A. water
B. finer particles
C. middle sized particle
D. coarser particles
Answer» C. middle sized particle
206.

Bulking of sand is

A. compacting of sand
B. segregating sand of particular size
C. increase in volume of sand due to presence of moisture upto certain extent
D. none of the above
Answer» C. increase in volume of sand due to presence of moisture upto certain extent
207.

If the fineness modulus of sand is 3, then the sand is graded as

A. very fine sand
B. fine sand
C. medium sand
D. coarse sand
Answer» D. coarse sand
208.

More water should not be added in the concrete mix, as to increase

A. strength
B. durability
C. water-cement ratio
D. all of these
Answer» C. water-cement ratio
209.

The concrete mix is said to be workable if it has

A. compatibility
B. movability
C. stability
D. all of these
Answer» D. all of these
210.

The maximum particle size of fine aggregate is

A. 2.5 mm
B. 4.75 mm
C. 5.85 mm
D. 6.5 mm
Answer» B. 4.75 mm
211.

The size of an aggregate is determined by length gauge.

A. Yes
B. No
Answer» B. No
212.

The aggregate is said to be flaky when

A. its least dimension is three-fifth of its mean dimension
B. its least dimension is equal to its mean dimension
C. its length is equal to its mean dimension
D. its length is equal to 1.8 times its mean dimension
Answer» A. its least dimension is three-fifth of its mean dimension
213.

In designing a ware-house, it is assumed that

A. each bag contains 50 kg of cement
B. floor area occupied by one bag of cement is 0.3 m2
C. height of each cement bag containing 35 litres of cement is 0.18 m
D. all of the above
Answer» D. all of the above
214.

The concrete

A. should
B. should not
Answer» A. should
215.

The strength of concrete using air entraining cement gets reduced by

A. 5 to 10%
B. 10 to 15%
C. 15 to 20%
D. 20 to 25%
Answer» B. 10 to 15%
216.

A compaction factor of 0.88 indictes that the workability of concrete mix is

A. very low
B. low
C. medium
D. high
Answer» C. medium
217.

In order to prepare a test specimen, it is necessary to

A. mix the cement and fine aggregate (sand) by dry hand
B. mix the coarse aggregate
C. mix water to the cment, fine aggregate and coarse aggregates
D. all of the above
Answer» D. all of the above
218.

In the manufacture of possolana cement, the amount of pozzolana material added to ordinary Portland cement clinkers is about

A. 20%
B. 30%
C. 40%
D. 50%
Answer» B. 30%
219.

The usual proportion of ingredients in plain cement concrete is

A. Portland cement (1 part), clean sand (1
B. Portland cement (1 part), clean sand (3 to 16 parts) and coarse aggregate (1
C. Porland cement (1 part), clean sand and coarse aggregate (1
D. any one of the above
Answer» A. Portland cement (1 part), clean sand (1
220.

The arbitrary mix method, the coarse aggregates are taken twice the fine aggregates.

A. True
B. False
Answer» A. True
221.

At freezing point, the concrete sets easily.

A. Right
B. Wrong
Answer» B. Wrong
222.

Too much finencess of cement

A. results cracks in concrete
B. generates greater heat
C. develops early strength
D. both (a) and (b)
Answer» D. both (a) and (b)
223.

In making precast structural units for partition and wall lining purposes, the concrete should be

A. sawdust concrete
B. air-entrained concrete
C. light-weight concrete
D. vacuum concrete
Answer» C. light-weight concrete
224.

Calcareous material used in the manufacture of cement consists of

A. lime stone
B. chalk
C. shells
D. all of these
Answer» D. all of these
225.

Los Angeles machine is used to perform the abrasion resistance test of an aggregate.

A. Right
B. Wrong
Answer» A. Right
226.

The workability of concrete mix increases with the increase in moisture content.

A. Agree
B. Disagree
Answer» A. Agree
227.

Ordinary Portland cement should not be used for construction work exposed to sulphates in the soil.

A. Agree
B. Disagree
Answer» A. Agree
228.

According to IS : 269 - 1976, the requirement of an ordinary Portland cement is that

A. the residue does not exceed 10% when sieved through IS sieve No. 9
B. its expansion is not more than 10 mm for unaerated cement
C. its initial setting time is not less than 30 minutes
D. all of the above
Answer» D. all of the above
229.

The 'first-in, first-out' rule should eb applied when cement hags are to be removed from the ware-house.

A. True
B. False
Answer» A. True
230.

The placement of concrete should be discontinued during rainy periods

A. Yes
B. No
Answer» A. Yes
231.

The mixer, which produces a steady stream of concrete as long as it is in operation, is known as

A. non-tilling batch mixer
B. tilting type batch mixer
C. continuous mixer
D. none of these
Answer» C. continuous mixer
232.

The cement concrete, from which entrained air and excess water are removed after placing it in position, is called

A. vacuum concrete
B. light weight concrete
C. prestressed concrete
D. sawdust concrete
Answer» A. vacuum concrete
233.

Which of the following statement is wrong?

A. If the height of pile exceeds 1.44 m, the cement bags should be arranged in header and stretcher fashion.
B. The cement bags should be rolled on the floor when it is taken out for use.
C. The strength of cement decreases with the passage of time.
D. none of the above
Answer» D. none of the above
234.

In the slump test, the maximum size of the aggregate should not exceed 38 mm.

A. Correct
B. Incorrect
Answer» A. Correct
235.

Hydration of cement evolves heat.

A. True
B. False
Answer» A. True
236.

Pezzolana is essentially a silicious material containing clay upto

A. 20%
B. 40%
C. 60%
D. 80%
Answer» D. 80%
237.

An aggregate is said to be

A. coarse
B. fine
C. cyclopean
Answer» C. cyclopean
238.

When the sand is fully saturated, its volume is

A. equal to
B. less than
C. more than
Answer» A. equal to
239.

The resistance of an aggregate to sudden compressive forces is called impact value.

A. Correct
B. Incorrect
Answer» A. Correct
240.

The controlled concrete is used for

A. one grade of concrete mix
B. three grades of concrete mix
C. five grades of concrete mix
D. all the seven grades of concrete mix
Answer» D. all the seven grades of concrete mix
241.

The admixtures are added in concrete to

A. accelerate the rate of setting and hardening of cement
B. make the concrete water proof, acid proof etc.
C. reduce the bleeding and segregation of concrete mix
D. all of the above
Answer» D. all of the above
242.

The aggregate is said to be elongated when

A. its least dimension is three-fifth of its mean dimension
B. its least dimension is equal to its mean dimension
C. its length is equal to its mean dimension
D. its length is equal to 1.8 times its mean dimension
Answer» D. its length is equal to 1.8 times its mean dimension
243.

The maximum particle size of coarse aggregate is

A. 45 mm
B. 55 mm
C. 65 mm
D. 75 mm
Answer» D. 75 mm
244.

The cement, widely used in retaining walls, is

A. rapid hardening cement
B. low heat cement
C. sulphate resisting cement
D. ordinary Portland cement
Answer» B. low heat cement
245.

The presence of tricalcium silicate in cement

A. hydrates the cement rapidly
B. generates less heat of hydration
C. offers high resistance to sulphate attack
D. all of these
Answer» A. hydrates the cement rapidly
246.

If sea water is used for preparing concrete mix, it

A. reduces strength
B. corrodes steel reinforcement
C. causes efflorescence
D. all of these
Answer» D. all of these
247.

Which of the following statement is correct?

A. The high early strength is obtained by adding tricalcium silicate in cement.
B. The dicalcium silicate provides good ultimate strength to cement.
C. The tetra calcium alumino ferrite has poor cementing value.
D. all of the above
Answer» D. all of the above
248.

Vibrated concrete needs

A. less
B. high
Answer» A. less
249.

Alumina in the cement lowers the clinkering temperature.

A. Agree
B. Disagree
Answer» A. Agree
250.

The concrete can be lifted by pumps through a maximum vertical distance of

A. 10 m
B. 20 m
C. 30 m
D. 50 m
Answer» D. 50 m

Done Studing? Take A Test.

Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.