[Solved] A DC series motor is best suited for electrical traction because:

Q.	A DC series motor is best suited for electrical traction because:
A.	it develops high starting torque
B.	it runs at very high speed
C.	it is cheaper in cost
D.	it is more rugged in construction like induction motor
Answer» A. it develops high starting torque

1.4k

Do you find this helpful?

View all MCQs in

Electrical and Electronics Engineering

Discussion

No comments yet

Related MCQs

A 4 pole, 250V series motor has a wave connected armature with 1254 conductors. The flux per pole is 22mWb when the motor taking 50A. Iron and friction lossses amount to 1000W. Armature resistance 0.2Ω, series field resistance 0.2Ω. What is the speed of the motor___.
A 4 pole, 250V series motor has a wave connected armature with 1254 conductors. The flux per pole is 22mWb when the motor taking 50A. Iron and friction lossses amount to 1000W. Armature resistance 0.2Ω, series field resistance 0.2Ω. What is the output power in H.P.
An electrical train employing a dc series motor is running at the fixed speed, when a sudden slight drop in the mains voltage occurs. This would result in:
The usual test to find the efficiency of the traction motor is
A 220V DC series motor is taking a current of 40A. Resistance of armature is 0.5Ω and series field is 0.25Ω. What is the voltage at the brushes?
A 220V DC series motor is taking a current of 40A. Resistance of armature is 0.5Ω and series field is 0.25Ω. What is the back emf?
A 220V series motor takes a current of 35A and runs at 500rpm. Armature resistance of 0.25Ω and series field resistance 0.3Ω. If iron and frictional losses amount of 600W, what is the armature torque?
A 220V series motor takes a current of 35A and runs at 500rpm. Armature resistance of 0.25Ω and series field resistance 0.3Ω. If iron and frictional losses amount of 600W, what is the shaft torque?
A 200V DC series motor runs at 500rpm when taking a line current of 25A.The resistance of the armature is 0.3Ω and that of the series field is 0.5Ω. If current taken remains constant, calculate the resistance necessary to reduce the speed to 350rpm.
A thick wire is used in dc series motor field winding than that in dc shunt motor: