[Solved] A 30W, 300V D.C. shunt genrator has armature and field resistances of 0.05Ω and 100Ω respectively. What is generated e.m.f.?

Q.	A 30W, 300V D.C. shunt genrator has armature and field resistances of 0.05Ω and 100Ω respectively. What is generated e.m.f.?
A.	295.25v
B.	311.25v
C.	305.15v
D.	none of the above
Answer» C. 305.15v

1.3k

Do you find this helpful?

View all MCQs in

Electrical and Electronics Engineering

Discussion

No comments yet

Related MCQs

A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the back emf?
A 8 pole dc generator has a lap wound armature having 400 armature turns. If flux/pole is 10mWb and emf generated in armature is 200v then speed is -----rpm
A 250V DC shunt motor takes a total current of 20A. Resistance of shunt field winding is 200Ω and that of armature is 0.3Ω . What is the current in the armature?
A shunt motor runs at 500rpm on a 200V circuit. Its armature resistance is 0.5Ω and the current taken is 30A in addition to field current. What resistance must be placed in series with armature circuit to reduce to speed to 300 rpm; the current in armature remains same.
A 4 pole 1200 rpm, dc generator has lap wound armature producing 240v emf in the armature with flux/pole as 0.02Wb,then total number of armature conductors are
A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the full load speed of the motor?
The armature of a 4 pole shunt motor has a lap winding accomodated in 60 slots, each containing 20 conductors, if the useful flux per pole is 23mWb, the armature torque developed when the armature current is 50A is _____.
A 440V shunt motor has an armature resistance of 0.8Ω field reistnace of 200Ω . Find the back emf when giving an output of 7.46kW at 85 % efficiency?
A 220V DC shunt motor takes a total current of 80A and runs at 800 rpm. Resistnace of a shunt field is 50Ω and that of armature 0.1Ω. The iron and friction losses amount to 1600W. What is the armture torque?
A 220V DC shunt motor takes a total current of 80A and runs at 800 rpm. Resistnace of a shunt field is 50Ω and that of armature 0.1Ω. The iron and friction losses amount to 1600W. What is the lost torque?